Hmmm, that looks reasonable, but do you also have BDII_MON_URL defined?
I will have a look...
-----Original Message-----
From: LHC Computer Grid - Rollout on behalf of Leslie Groer
Sent: Fri 9/9/2005 10:54 PM
To: [log in to unmask]
Subject: Re: [LCG-ROLLOUT] Problem with GIIS/site-BDII information in LCG-2.6.0
Nope - I have
BDII_HOST=lcg-bdii.cern.ch
BDII_HTTP_URL="http://grid-deployment.web.cern.ch/grid-deployment/gis/lcg2-bdii/dteam/lcg2-all-sites.conf"
BDII_REGIONS="CE SE MON" # list of the services provided by the site
BDII_CE_URL="ldap://$CE_HOST:2135/mds-vo-name=local,o=grid"
BDII_SE_URL="ldap://$SE_HOST:2135/mds-vo-name=local,o=grid"
Leslie
On Fri, 9 Sep 2005, Maarten Litmaath wrote:
> Edit your site-info.def to correct the BDII hostname:
> I bet it still says your CE is your BDII...
>
> -----Original Message-----
> From: LHC Computer Grid - Rollout on behalf of Leslie Groer
> Sent: Fri 9/9/2005 10:46 PM
> To: [log in to unmask]
> Subject: Re: [LCG-ROLLOUT] Problem with GIIS/site-BDII information in LCG-2.6.0
>
> Hi Maarten
>
> I tried that - I (mistakenly) added in lcg-BDII in the install and
> configure step and then tried backing out (i.e. rerunning the configure
> step with only CE) and thought the bdii.conf was set up for site-BDII
> only. What else needs to be removed or unconfigured?
>
> Thanks
> Leslie
>
> On Fri, 9 Sep 2005, Maarten Litmaath wrote:
>
> > Hi Leslie,
> > I suppose you configured your CE as a BDII at the same time?
> > You cannot do that. By default the CE will run the _site_ BDII
> > (read: site GIIS), while you told it to act as a top-level BDII,
> > querying all LCG-2 sites. Just reconfigure your CE as CE only.
> >
> >
> > -----Original Message-----
> > From: LHC Computer Grid - Rollout on behalf of Leslie Groer
> > Sent: Fri 9/9/2005 9:45 PM
> > To: [log in to unmask]
> > Subject: [LCG-ROLLOUT] Problem with GIIS/site-BDII information in LCG-2.6.0
> >
> > I have been frustrated in my attempts to get sensible information out of
> > our site GIIS and BDII. LDAP queries of the local GIIS return some
> > sensible information, but querying the site-BDII does not return anything
> > useful. This is on SL305 and I do have slapd: 127.0.0.1 in
> > /etc/hosts.allow.
> >
> > All services seem to be running. I have looked at the Information System
> > Trouble Shooting Guide http://lfield.home.cern.ch/lfield/trouble.html#2
> > but it is not clear how to proceed if there is a problem (plus there have
> > been some changes since this page was put together).
> >
> > % ldapsearch -x -H ldap://bigmac-lcg-ce.physics.utoronto.ca:2135 -b mds-vo-name=local,o=grid
> > Returns sensible looking results
> > # numEntries: 34
> >
> > % ldapsearch -x -H ldap://bigmac-lcg-ce.physics.utoronto.ca:2135 -b mds-vo-name=toronto-lcg2,o=grid
> > version: 2
> > # filter: (objectclass=*)
> > # requesting: ALL
> > # search result
> > search: 2
> > result: 32 No such object
> > # numResponses: 1
> >
> > Obviously something has gone wrong already.
> >
> > Queries to port 2170 for the local mds return information for dozens on
> > sites with
> >
> > % ldapsearch -x -H ldap://bigmac-lcg-ce.physics.utoronto.ca:2170 -b mds-vo-name=local,o=grid
> > <snip>
> > # numEntries: 7135
> >
> > but
> >
> > % ldapsearch -x -H ldap://bigmac-lcg-ce.physics.utoronto.ca:2170 -b mds-vo-name=toronto-lcg2,o=grid
> > returns
> > result: 32 No such object
> > matchedDN: o=grid
> >
> > Possibly useful information:
> >
> > Turned on debug_level=1 in /etc/init.d/globus-mds
> >
> > Starting Globus MDS
> > Using sysconfig: /etc/sysconfig/globus
> > Using GLOBUS_LOCATION: /opt/globus
> > Using grid-functions: /etc/rc.d/init.d/grid-functions
> > Using configuration file: /etc/globus.conf
> > overwrite_config=yes : creating new configuration files
> > Making backup of /opt/globus/etc/grid-info-slapd.conf
> > Creating file: /opt/globus/etc/grid-info-slapd.conf
> > Using provider_path: /opt/globus/libexec
> > Using schemalist: /opt/globus/libexec/edg.schemalist
> > Using flavor: gcc32dbgpthr
> > Using module path: /opt/globus/libexec/openldap/gcc32dbgpthr
> > Using backend: ldif
> > Making backup of /opt/globus/etc/grid-info-resource-register.conf
> > Creating file: /opt/globus/etc/grid-info-resource-register.conf
> > Register "Mds-Vo-name=local, o=grid" to bigmac-lcg-ce.physics.utoronto.ca:2135/toronto-lcg2
> > Making backup of /opt/globus/etc/grid-info-resource-ldif.conf
> > Creating file: /opt/globus/etc/grid-info-resource-ldif.conf
> > Using provider info: /opt/globus/libexec/edg.info
> > Using grid-mapfile: /etc/grid-security/grid-mapfile
> > Using cert: /etc/grid-security/hostcert.pem
> > Using key : /etc/grid-security/hostkey.pem
> > Executing: /opt/globus/sbin/grid_info_daemon -
> > /opt/globus/sbin/grid-info-soft-register -log
> > /var/tmp/edginfo-globus-mds.log -f
> > /opt/globus/etc/grid-info-resource-register.conf --
> > /opt/globus/libexec/slapd -h ldap://bigmac-lcg-ce.physics.utoronto.ca:2135
> > -f /opt/globus/etc/grid-info-slapd.conf -d 1 -u edginfo > /dev/null 2>&1 &
> >
> > % ps awxuu | grep bdii
> > edguser 15790 21.8 0.8 22208 17608 pts/1 R 14:59 7:52
> > /usr/bin/perl -w /opt/bdii//sbin/bdii-update /opt/bdii/etc/bdii.conf
> > edguser 16672 0.1 0.2 8892 4364 pts/1 S 15:01 0:02 bdii-fwd
> > [accepting proxy for localhost]
> > edguser 3519 0.7 1.6 70336 33640 ? S 15:31 0:01
> > /usr/sbin/slapd -f /opt/bdii//var/2173/bdii-slapd.conf -h ldap://localhost:2173 -u edguser
> > edguser 4574 1.3 1.6 69584 33668 ? S 15:33 0:01
> > /usr/sbin/slapd -f /opt/bdii//var/2171/bdii-slapd.conf -h ldap://localhost:2171 -u edguser
> > edguser 5577 0.5 0.0 5288 996 pts/1 S 15:35 0:00 sh -c
> > /usr/sbin/slapadd -c -d 4 -v -f /opt/bdii//var/2172/bdii-slapd.conf >/dev/null 2>/opt/bdii//var/tmp/stderr.log
> > edguser 5578 87.5 0.6 41804 13996 pts/1 R 15:35 0:01
> > /usr/sbin/slapadd -c -d 4 -v -f /opt/bdii//var/2172/bdii-slapd.conf
> >
> > % iptables -L
> > Chain INPUT (policy ACCEPT)
> > target prot opt source destination
> >
> > Chain FORWARD (policy ACCEPT)
> > target prot opt source destination
> >
> > Chain OUTPUT (policy ACCEPT)
> > target prot opt source destination
> >
> > % cat /opt/bdii/etc/bdii.conf
> > BDII_PORT_READ=2170
> > BDII_PORTS_WRITE="2171 2172 2173"
> > BDII_USER=edguser
> > BDII_BIND=mds-vo-name=local,o=grid
> > BDII_PASSWD=xxxxxx
> > BDII_SEARCH_FILTER='*'
> > BDII_SEARCH_TIMEOUT=30
> > BDII_BREATHE_TIME=60
> > BDII_AUTO_UPDATE=yes
> > BDII_AUTO_MODIFY=no
> > BDII_DIR=/opt/bdii/
> > BDII_UPDATE_URL=http://grid-deployment.web.cern.ch/grid-deployment/gis/lcg2-bdii/dteam/lcg2-all-sites.conf
> > BDII_UPDATE_LDIF=http://
> > SLAPD=/usr/sbin/slapd
> > SLAPADD=/usr/sbin/slapadd
> >
> > Thanks
> > Leslie
> >
> >
>
>
--
,-~~-.___. ________________________________________________
/ | ' \ [log in to unmask] Department of Physics
( ) 0 Tel: +1-416-978-2959 University of Toronto
\_/-, ,----' Fax: +1-416-978-8221 60 St. George Street
==== // Toronto, ON M5S 1A7
/ \-'~; /~~~(O) Canada
/ __/~| / | Office: McLennan Physics Lab Room 911
=( _____| (_________| http://home.fnal.gov/~groer
Leslie S. Groer
|