|
Hi Chiara,
There several parameters you might try to improve for a specific dataset.
--local_radius 1024.00 default value seems a bit too big, though more
stable. For micrographs with better SNR, try to reduce this weighting
radius.
--local_overlap 0.50 larger value, say 0.8, is always better, but
the speed is slower.
--local_boxsize 512 300-800 all seem to work OK in most cases, but
do try to see which works best.
--write_local_ctf specify it for diagnosis, not necessary for
batch processing.
P.S. Note the current local power spectra weighting scheme and local CTF
refinement strategy implemented in GCTF was >4 years old. Though I believe
it works well in most cases, there is always some room to make it better
and things have been slightly improved in many aspects in the newer
versions. I will release it at some point when I settle down in US.
Best wishes
Kai
> Hi Chiara,
> You don't have to convert your particle into .box format. Simply specify
_autopick.star for the --boxsuffix. I would first link all the
micrographs
> into the folder that contains the particle coordinates that you have
picked in RELION. In my case, it is the folder
Autopick/job010/micrographs
> .
> Here is an example command line:
> Gctf-v1.06_sm_20_cu8.0_x86_64 *.mrc --do_local_refine --boxsuffix
_autopick.star --apix 1 --kV 300 --Cs 2.7
> Hope it answers your question.
> Best,
> Chen
> ________________________________
> From: Collaborative Computational Project in Electron cryo-Microscopy
<[log in to unmask]> on behalf of Chiara Rapisarda
> <[log in to unmask]>
> Sent: Monday, July 9, 2018 1:05:57 PM
> To: [log in to unmask]
> Subject: [ccpem] tilted collect ctf estimation in relion
> Hello,
> I have just collected a series of 40 deg tilted micrographs and I would
like to do a per particle CTF estimation in RELION 2.1 (as I used to do
on
> EMAN2). I couldn’t find a thread where the topic was discussed. Is it
even
> possible, and if not, are there any other options ? Would it work by
command line?
> I found this command: Gctf-v0.50_sm_30_cu5.0_x86_64
> Micrographs/Falcon*.mrc --do_EPA --apix 1.07 --do_local_refine
--boxsuffix
> .box
> I have autopicked particles on relion, would I be able to use this
command
> if I convert my particles into a .box format?
> Thank you for any help,
> Chiara
> Chiara Rapisarda
> Post doc
> Université de Bordeaux, CNRS, INSERM
> [log in to unmask]
> Tel. +33 (5) 4000 3617
> Institut européen de chimie et biologie
> 2, rue Robert Escarpit
> 33607 Pessac, France
> www.iecb.u-bordeaux.fr
> ________________________________
> To unsubscribe from the CCPEM list, click the following link:
> https://www.jiscmail.ac.uk/cgi-bin/webadmin?SUBED1=CCPEM&A=1
> ########################################################################
To unsubscribe from the CCPEM list, click the following link:
> https://www.jiscmail.ac.uk/cgi-bin/webadmin?SUBED1=CCPEM&A=1
########################################################################
To unsubscribe from the CCPEM list, click the following link:
https://www.jiscmail.ac.uk/cgi-bin/webadmin?SUBED1=CCPEM&A=1
|
