-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Because C has 6 electrons and without thermal vibrations (T=0/B=0) I
thought you'd catch all six of them with a box of 1A side length.
Is this too simple thinking?
Tim
On 09/20/2012 02:19 PM, Ian Tickle wrote:
> Tim, I don't follow your argument: why should the density be 6A^-3
> at the centre of a C atom?
>
> -- Ian
>
> On 20 September 2012 10:39, Tim Gruene <[log in to unmask]>
> wrote: tg@slartibartfast:~/tmp$ phenix.python run.py 0.001
> 627.413 -4.01639e+06 303880 0.1 275.984
> 275.247 435.678 0.5 92.2049 92.206
> 93.6615 1 47.8941 47.8936 47.9421 10
> 3.54414 3.54415 3.5439 100 0.217171
> 0.21717 0.21714
>
> weird numbers. A proper description would have 6e/A^3 for a C at
> x=(0,0,0) with B=0. How are these numbers 'not inaccurate'?
>
> Cheers, Tim
>
> On 09/19/2012 06:47 PM, Pavel Afonine wrote:
>>>> Hi James,
>>>>
>>>> using dynamic N-Gaussian approximation to form-factor tables
>>>> as described here (pages 27-29):
>>>>
>>>> http://cci.lbl.gov/publications/download/iucrcompcomm_jan2004.pdf
>>>>
>>>>
>>>>
and used in Phenix since 2004, avoids both: singularity at B=0 and
>>>> inaccurate density values (compared to the raw forma-factor
>>>> tables) for B->0.
>>>>
>>>> Attached is the script that proves this point. To run,
>>>> simply "phenix.python run.py".
>>>>
>>>> Pavel
>>>>
>>>> On Sun, Sep 16, 2012 at 11:32 PM, James Holton
>>>> <[log in to unmask]> wrote:
>>>>
>>>>> Yes, the constant term in the "5-Gaussian" structure
>>>>> factor tables does become annoying when you try to plot
>>>>> electron density in real space, but only if you try to make
>>>>> the B factor zero. If the B factors are ~12 (like they are
>>>>> in 1m1n), then the electron density 2.0 A from an Fe atom
>>>>> is not -0.2 e-/A^3, it is 0.025 e-/A^3. This is only 1% of
>>>>> the electron density at the center of a nitrogen atom with
>>>>> the same B factor.
>>>>>
>>>>> But if you do set the B factor to zero, then the electron
>>>>> density at the center of any atom (using the 5-Gaussian
>>>>> model) is infinity. To put it in gnuplot-ish, the
>>>>> structure factor of Fe (in reciprocal space) can be plotted
>>>>> with this function:
>>>>> Fe_sf(s)=Fe_a1*exp(-Fe_b1*s*s)**+Fe_a2*exp(-Fe_b2*s*s)+Fe_a3***
>>>>>
>>>>>
exp(-Fe_b3*s*s)+Fe_a4*exp(-Fe_**b4*s*s)+Fe_c
>>>>>
>>>>> where: Fe_c = 1.036900; Fe_a1 = 11.769500; Fe_a2 =
>>>>> 7.357300; Fe_a3 = 3.522200; Fe_a4 = 2.304500; Fe_b1 =
>>>>> 4.761100; Fe_b2 = 0.307200; Fe_b3 = 15.353500; Fe_b4 =
>>>>> 76.880501; and "s" is sin(theta)/lambda
>>>>>
>>>>> applying a B factor is then just multiplication by
>>>>> exp(-B*s*s)
>>>>>
>>>>>
>>>>> Since the terms are all Gaussians, the inverse Fourier
>>>>> transform can actually be done analytically, giving the
>>>>> real-space version, or the expression for electron density
>>>>> vs distance from the nucleus (r):
>>>>>
>>>>> Fe_ff(r,B) = \
>>>>> +Fe_a1*(4*pi/(Fe_b1+B))**1.5***safexp(-4*pi**2/(Fe_b1+B)*r*r)
>>>>> \
>>>>> +Fe_a2*(4*pi/(Fe_b2+B))**1.5***safexp(-4*pi**2/(Fe_b2+B)*r*r)
>>>>> \
>>>>> +Fe_a3*(4*pi/(Fe_b3+B))**1.5***safexp(-4*pi**2/(Fe_b3+B)*r*r)
>>>>> \
>>>>> +Fe_a4*(4*pi/(Fe_b4+B))**1.5***safexp(-4*pi**2/(Fe_b4+B)*r*r)
>>>>> \ +Fe_c *(4*pi/(B))**1.5*safexp(-4*pi****2/(B)*r*r);
>>>>>
>>>>> Where here applying a B factor requires folding it into
>>>>> each Gaussian term. Notice how the Fe_c term blows up as
>>>>> B->0? This is where most of the series-termination effects
>>>>> come from. If you want the above equations for other atoms,
>>>>> you can get them from here:
>>>>> http://bl831.als.lbl.gov/~**jamesh/pickup/all_atomsf.**gnuplot<http://bl831.als.lbl.gov/~jamesh/pickup/all_atomsf.gnuplot>
>>>>>
>>>>>
>
>>>>>
http://bl831.als.lbl.gov/~**jamesh/pickup/all_atomff.**gnuplot<http://bl831.als.lbl.gov/~jamesh/pickup/all_atomff.gnuplot>
>>>>>
>>>>> This "infinitely sharp spike problem" seems to have led
>>>>> some people to conclude that a zero B factor is
>>>>> non-physical, but nothing could be further from the truth!
>>>>> The scattering from mono-atomic gasses is an excellent
>>>>> example of how one can observe the B=0 structure factor.
>>>>> In fact, gas scattering is how the quantum mechanical
>>>>> self-consistent field calculations of electron clouds
>>>>> around atoms was experimentally verified. Does this mean
>>>>> that there really is an infinitely sharp "spike" in the
>>>>> middle of every atom? Of course not. But there is a
>>>>> "very" sharp spike.
>>>>>
>>>>> So, the problem of "infinite density" at the nucleus is
>>>>> really just an artifact of the 5-Gaussian formalism.
>>>>> Strictly speaking, the "5-Gaussian" structure factor
>>>>> representation you find in ${CLIBD}/atomsf.lib (or Table
>>>>> 6.1.1.4 in the International Tables volume C) is nothing
>>>>> more than a curve fit to the "true" values listed in ITC
>>>>> volume C tables 6.1.1.1 (neutral atoms) and 6.1.1.3 (ions).
>>>>> These latter tables are the Fourier transform of the "true"
>>>>> electron density distribution around a particular atom/ion
>>>>> obtained from quantum mechanical self-consistent field
>>>>> calculations (like those of Cromer, Mann and many others).
>>>>>
>>>>> The important thing to realize is that the fit was done in
>>>>> _reciprocal_ space, and if you look carefully at tables
>>>>> 6.1.1.1 and 6.1.1.3, you can see that even at REALLY high
>>>>> angle (sin(theta)/lambda = 6, or 0.083 A resolution) there
>>>>> is still significant elastic scattering from the heavier
>>>>> atoms. The purpose of the "constant term" in the
>>>>> 5-Gaussian representation is to try and capture this
>>>>> high-angle "tail", and for the really heavy atoms this can
>>>>> be more than 5 electron equivalents. In real space, this
>>>>> is equivalent to saying that about 5 electrons are located
>>>>> within at least ~0.03 A of the nucleus. That's a very
>>>>> short distance, but it is also not zero. This is because
>>>>> the first few shells of electrons around things like a
>>>>> Uranium nucleus actually are very small and dense. How,
>>>>> then, can we have any hope of modelling heavy atoms
>>>>> properly without using a map grid sampling of 0.01A ?
>>>>> Easy! The B factors are never zero.
>>>>>
>>>>> Even for a truly infinitely sharp peak (aka a single
>>>>> electron), it doesn't take much of a B factor to spread it
>>>>> out to a reasonable size. For example, applying a B factor
>>>>> of 9 to a point charge will give it a full-width-half max
>>>>> (FWHM) of 0.8 A, the same as the "diameter" of a carbon
>>>>> atom. A carbon atom with B=12 has FWHM = 1.1 A, the same
>>>>> as a "point" charge with B=16. Carbon at B=80 and a point
>>>>> with B=93 both have FWHM = 2.6 A. As the B factor becomes
>>>>> larger and larger, it tends to dominate the atomic shape
>>>>> (looks like a single Gaussian). This is why it is so hard
>>>>> to assign atom types from density alone. In fact, with
>>>>> B=80, a Uranium atom at 1/100th occupancy is essentially
>>>>> indistinguishable from a hydrogen atom. That is, even a
>>>>> modest B factor pretty much "washes out" any sharp features
>>>>> the atoms might have. Sometimes I wonder why we bother
>>>>> with "form factors" at all, since at modest resolutions all
>>>>> we really need is Z (the atomic number) and the B factor.
>>>>> But, then again, I suppose it doesn't hurt either.
>>>>>
>>>>>
>>>>> So, what does this have to do with series termination?
>>>>> Series termination arises in the inverse Fourier transform
>>>>> (making a map from structure factors). Technically, the
>>>>> "tails" of a Gaussian never reach zero, so any sort of
>>>>> "resolution cutoff" always introduces some error into the
>>>>> electron density calculation. That is, if you create an
>>>>> arbitrary electron-density map, convert it into structure
>>>>> factors and then "fft" it back, you do _not_ get the same
>>>>> map that you started with! How much do they differ?
>>>>> Depends on the RMS value of the high-angle structure
>>>>> factors that have been cut off (Parseval's theorem). The
>>>>> "infinitely sharp spike" problem exacerbates this, because
>>>>> the B=0 structure factors do not tend toward zero as fast
>>>>> as a Gaussian with the "atomic width" would.
>>>>>
>>>>> So, for a given resolution, when does the B factor get
>>>>> "too sharp"? Well, for "protein" atoms, the following B
>>>>> factors will introduce an rms error in the electron density
>>>>> map equal to about 5% of the peak height of the atoms when
>>>>> the data are cut to the following resolution: d B 1.0
>>>>> <5 1.5 8 2.0 27 2.5 45 3.0 65 3.5 86 4.0 >99
>>>>>
>>>>> smaller B factors than this will introduce more than 5%
>>>>> error at each of these resolutions. Now, of course, one is
>>>>> often not nearly as concerned with the average error in the
>>>>> map as you are with the error at a particular point of
>>>>> interest, but the above numbers can serve as a rough guide.
>>>>> If you want to see the series-termination error at a
>>>>> particular point in the map, you will have to calculate the
>>>>> "true" map of your model (using a program like SFALL), and
>>>>> then run the map back and forth through the Fourier
>>>>> transform and resolution cutoff (such as with SFALL and
>>>>> FFT). You can then use MAPMAN or Chimera to probe the
>>>>> electron density at the point of interest.
>>>>>
>>>>> But, to answer the OP's question, I would not recommend
>>>>> trying to do fancy map interpretation to identify a mystery
>>>>> atom. Instead, just refine the occupancy of the mystery
>>>>> atom and see where that goes. Perhaps jiggling the rest of
>>>>> the molecule with "kick maps" to see how stable the
>>>>> occupancy is. Since refinement only does forward-FFTs, it
>>>>> is formally insensitive to series termination errors. It
>>>>> is only map calculation where series termination can become
>>>>> a problem.
>>>>>
>>>>> Thanks to Garib for clearing up that last point for me!
>>>>>
>>>>> -James Holton MAD Scientist
>>>>>
>>>>>
>>>>>
>>>>> On 9/15/2012 3:12 AM, Tim Gruene wrote:
>>>>>
>>>> Dear Ian,
>>>>
>>>> provided that f(s) is given by the formula in the
>>>> Cromer/Mann article, which I believe we have agreed on, the
>>>> inset of Fig.1 of the Science article we are talking about is
>>>> claimed to be the graph of the function g, which I added as
>>>> pdf to this email for better readability.
>>>>
>>>> Irrespective of what has been plotted in any other article
>>>> meantioned throughout this thread, this claim is incorrect,
>>>> given a_i, b_i, c > 0.
>>>>
>>>> I am sure you can figure this out yourself. My argument was
>>>> not involving mathematical programs but only one-dimensional
>>>> calculus.
>>>>
>>>> Cheers, Tim
>>>>
>>>> On 09/14/2012 04:46 PM, Ian Tickle wrote:
>>>>
>>>>>>>> On 14 September 2012 15:15, Tim Gruene
>>>>>>>> <[log in to unmask]> wrote:
>>>>>>>>
>>>>>>>>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
>>>>>>>>>
>>>>>>>>> Hello Ian,
>>>>>>>>>
>>>>>>>>> your article describes f(s) as sum of four
>>>>>>>>> Gaussians, which is not the same f(s) from Cromer's
>>>>>>>>> and Mann's paper and the one used both by Niu and
>>>>>>>>> me. Here, f(s) contains a constant, as I pointed
>>>>>>>>> out to in my response, which makes the integral
>>>>>>>>> oscillate between plus and minus infinity as the
>>>>>>>>> upper integral border (called 1/dmax in the article
>>>>>>>>> Niu refers to) goes to infinity).
>>>>>>>>>
>>>>>>>>> Maybe you can shed some light on why your article
>>>>>>>>> uses a different f(s) than Cromer/Mann. This
>>>>>>>>> explanation might be the answer to Nius question, I
>>>>>>>>> reckon, and feed my curiosity, too.
>>>>>>>>>
>>>>>>>> Tim & Niu, oops yes a small slip in the paper there,
>>>>>>>> it should have read "4 Gaussians + constant term":
>>>>>>>> this is clear from the ITC reference given and the
>>>>>>>> $CLIBD/atomsf.lib table referred to. In practice
>>>>>>>> it's actually rendered as a sum of 5 Gaussians after
>>>>>>>> you multiply the f(s) and atomic Biso factor terms,
>>>>>>>> so unless Biso = 0 (very unphysical!) there is
>>>>>>>> actually no constant term. My integral for rho(r)
>>>>>>>> certainly doesn't oscillate between plus and minus
>>>>>>>> infinity as d_min -> zero. If yours does then I
>>>>>>>> suspect that either the Biso term was forgotten or if
>>>>>>>> not then a bug in the integration routine (e.g. can
>>>>>>>> it handle properly the point at r = 0 where the
>>>>>>>> standard formula for the density gives 0/0?). I used
>>>>>>>> QUADPACK
>>>>>>>> (http://people.sc.fsu.edu/~**jburkardt/f_src/quadpack/**quadpack.html<http://people.sc.fsu.edu/~jburkardt/f_src/quadpack/quadpack.html>
>>>>>>>>
>>>>>>>>
>
>>>>>>>>
)
>>>>>>>> which seems pretty good at taking care of such
>>>>>>>> singularities (assuming of course that the integral
>>>>>>>> does actually converge).
>>>>>>>>
>>>>>>>> Cheers
>>>>>>>>
>>>>>>>> -- Ian
>>>>>>>>
>>>>>>>> - -- - --
>>>> Dr Tim Gruene Institut fuer anorganische Chemie Tammannstr.
>>>> 4 D-37077 Goettingen
>>>>
>>>> GPG Key ID = A46BEE1A
>>>>
>>>>>>
>>>>>
>
>
- --
- --
Dr Tim Gruene
Institut fuer anorganische Chemie
Tammannstr. 4
D-37077 Goettingen
GPG Key ID = A46BEE1A
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iD8DBQFQWxBkUxlJ7aRr7hoRAjKVAKDQPJCupdUU9sNfXawtPY6LK24z8QCglI6/
vGuvDiN/4rUSH7jOkUBUX3U=
=Tbus
-----END PGP SIGNATURE-----
|