Hi,
If the dhcp server is on a different machine to the lcfg server then
this mail from the archive might help. This has the same symptom,
i.e.cannot mount /ir62 because it tries to mount from the dhcp machine.
http://www.jiscmail.ac.uk/cgi-bin/wa.exe?A2=ind0204&L=tb-support&F=&S=&P=1841
It has the descriptive subject "Thanks".
Cheers,
Rod.
"Traylen, SM (Steve)" wrote:
>
> Hi Mike,
>
> For the mount problems, check the portmaper can be reached,
> you need to have something like
>
> portmap : 130.246.184. , 130.246.187. , 130.246.180.
> mountd : 130.246.184. , 130.246.187. , 130.246.180.
>
> in the hosts allow.
> you have to use ip addresses with portmapper, domain names do
> not work.
>
> If this is the problem I would expect something to appear in
> /var/log/messages or /var/log/auth certainly the mount request
> should be there.
>
> As regards gdmp conflict problem you have , which release are
> using, to stick to a release rather than getting the new HEAD then.
>
> $ cvs checkout -r v1_1_4 edg-release
>
> Steve
>
> -----Original Message-----
> From: Michael George [mailto:[log in to unmask]]
> Sent: Monday, May 13, 2002 3:39 PM
> To: [log in to unmask]
> Subject: Re: Testbed setup, RBs and GDMP-3.0-0
>
> Hi David,
>
> >
> > This is the error that you would expect if you are not in the mapfile on
> > the RB (which you are not at the moment). The best solution is to join a
> > VO, we currently accept GridPP and Babar VOs (although we may well expand
> > this to cover the LHC experiments if it is useful). I can add you by hand
> > for now if you just need to do some tests, for this I will need your
> > certificate subject.
>
> Thanks. I have applied to join the WP6 VO but if you could add me
> by hand for the moment that would be great. I'll send my subject in a
> separate mail.
>
> >
> > We have GDMP 3 installed here. We did this directly from the rpms without
> > using LCFG. Which elements of GDMP are you trying to install on your CEs?
> > Generally these only require the client (which I think is just one rpm).
>
> The two gdmp related rpms in my CE profile are...
>
> obj-gdmp-1.0-1.edg
> gdmp-client-3.0-0
>
> >
> > >
> > > Kernel panic: No init found. Try pasing init= option to kernel.
> > >
> > > (2) When I try to boot the WNs via LCFG they hang then give an
> RPC
> > > timeout before being able to mount the /ir62 directory from my LCFG
> > > server.
> >
> > Sorry cannot help with this one, assuming you have checked /etc/exports
> > and the like. Can you mount the disk on other machines? Maybe Steve T. can
> > help you more.
> >
>
> Yes I tried those. I can mount the disks fine. From
> /var/log/messages on the LCFG server it does seem to be unauhorised
> requesting of a mount, though I can mount fine from the same machine after
> it bombs out during installation. I'll have a deeper look into the
> etc/dcsrc file which LCFG installation uses.
>
> > >
> > > Lastly, once I have a "working" testbed here, how do I go about
> > > regitering with an RB?
> > >
> >
> > To register with the GridPP RB you mail either me or Rod Walker
> > ([log in to unmask]) and we can add your resources to the list. We
> > recommend that you start off with the GridPP RB and verify that everything
> > is happy and working before joining the CERN one.
>
> Thanks very much. Will do.
> >
> > All the best,
> > david
> >
>
> Cheers,
>
> Michael.
|