Hi David I can't think of anything on the market that would do it. There are various timer modules in RS with all sorts of ways of operating. You may get one of these to provide the timing function. Failing that you may need to create a circuit that produces an output pulse of fixed duration (long enough for the CD player to interpret as a valid press of the play/pause button) when the input switch is pressed. This first pulse causes the CD to play. The timer then starts counting and produces another output pulse after a preset duration. This second output pulse pauses the CD. The preset duration will be determined by a monostable - retriggerable if you want the music to continue if the person repeatedly presses the switch. If you want to run the additional circuitry from the same batteries as the remote control then you may need to connect an opto-isolator, rather than a relay, across the pause button because you are going to be working at a low supply voltage probably something like 3V. Hope this helps. Colin Geggie Clinical Scientist RES Eastern General Hospital Seafied Road Edinburgh Tel. 0131 536 4695 ***************************************************************** The information contained in this message may be confidential or legally privileged and is intended for the addressee only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. *****************************************************************