Hi Edward,
Your first error, the one about R-GMA, will be due to an error in your
site-info.def file. You have set the MON_HOST to be the machine that you
untared and ran the configuration on. This machine does not have tomcat4
installed as you have not installed it to be a MON node.
The second error is due to missing rpms on you WN. The tar distribution
assumes that you have the batch system components already installed on
your WN.
Laurence
Nicolescu, Edward L wrote:
> Folks,
>
> I have installed SL3 on all LCG2 nodes at BNL-LCG2 and next I
> proceeded to install LCG-2.3.1 as indicated in the
> "LCG Generic Installation and Configuration" manual, using yaim.
>
> Following the configuration of the CE node with configure_CE_torque, I
> have untarred the "relocatable distribution" on
> one of the worker nodes and followed the steps recommended under "To
> install a UI or WN as root" (page 15). First,
> I ran the two commands below,
>
> /opt/lcg/yaim/scripts/install_node
> /opt/lcg/yaim/examples/site-info.def lcg-TAR
> /opt/lcg/yaim/scripts/configure_TAR
> /opt/lcg/yaim/examples/site-info.def WN
>
> Running the configure_TAR script has already resulted in errors
> regarding rgma configuration (maybe a good soul
> on this list will explain me why r-gma is needed on an worker node ?!)
> as shown below:
>
> configuring config_rgma
> Traceback (most recent call last):
> File "/opt/edg/sbin/edg-rgma-config", line 1004, in ?
> main()
> File "/opt/edg/sbin/edg-rgma-config", line 43, in main
> xmlFileCreator = XmlFileCreator(rgmaRoot, env.developer,
> var).create()
> File "/opt/edg/sbin/edg-rgma-config", line 240, in create
> self.__CanonicalProducerServletXml()
> File "/opt/edg/sbin/edg-rgma-config", line 270, in
> __CanonicalProducerServletXml
> self.__insertableSuperclassParam()
> File "/opt/edg/sbin/edg-rgma-config", line 398, in
> __insertableSuperclassParam
> jvmMemory = PropertyFileRdr(os.path.join(self.var.catalina_home,
> 'conf/tomcat4.conf'))('JAVA_OPTS', '-Xmx64m')
> File "/opt/edg/sbin/edg-rgma-config", line 948, in __init__
> handle = file(filename, 'r')
> IOError: [Errno 2] No such file or directory:
> '/var/tomcat4/conf/tomcat4.conf'
>
> Anyway, I have disregarded the above error and proceeded to configure
> my worker node with torque by running
> the script below,
>
> /opt/lcg/yaim/scripts/configure_WN_torque
> /opt/lcg/yaim/examples/site-info.def
>
> Following a first set of errors regarding the inability to locate LSF,
> Condor and MPI commands (why did the
> script try to configure LSF and Condor when all I wanted was Torque ?)
> the same r-gma related output was
> issued again. Then, when it got to configure torque, a new set of
> errors were issued as shown below:
>
> Configuring config_torque_client ...
> Can't exec "/usr/bin/pbsnodes": No such file or directory at
> /opt/edg/sbin/edg-pbs-knownhosts line 32.
> Could note open /usr/bin/pbsnodes -a pipe: No such file or directory
> /opt/lcg/yaim/scripts/configure_WN_torque: line 60:
> /var/spool/pbs/mom_priv/config: No such file or directory
> error reading information on service pbs_mom: No such file or directory
> /opt/lcg/yaim/scripts/configure_WN_torque: line 70:
> /etc/rc.d/init.d/pbs_mom: No such file or directory
> /opt/lcg/yaim/scripts/configure_WN_torque: line 72:
> /etc/rc.d/init.d/pbs_mom: No such file or directory
> Configuration Complete
>
> Can anybody, please, explain me why configure_WN_torque needed pbs_mom
> ? As I understand, pbs_mom
> is used to start a pbs batch execution mini-server... But why on an
> worker node ?!?
>
> Your input regarding the error messages above and whether they should
> be ignored or not will be much appreciated !
>
> Cheers,
>
> Edward Nicolescu
>
> PS All the output from configure_WN_torque is dispalyed below.
>
>
> Script started on Wed 16 Mar 2005 04:53:35 PM EST
> [root@lcg-wn01 yaim]# /opt/lcg/yaim/scripts/configure_WN_torque
> /opt/lcg/yaim/examples/site-info.def
> Configuring config_ldconf ...
> Configuring config_sysconfig_edg ...
> Configuring config_sysconfig_globus ...
> Configuring config_sysconfig_lcg ...
> Configuring config_lcgenv ...
> Configuring config_globus ...
> creating globus-sh-tools-vars.sh
> creating globus-script-initializer
> creating Globus::Core::Paths
> checking globus-hostname
> Done
>
> Creating...
> /opt/globus/etc/grid-info.conf
> Done
>
> Creating...
> /opt/globus/sbin/SXXgris
> ln: `/opt/globus/sbin/globus-mds': File exists
> /opt/globus/libexec/grid-info-script-initializer
> /opt/globus/libexec/grid-info-mds-core
> /opt/globus/libexec/grid-info-common
> /opt/globus/libexec/grid-info-cpu*
> /opt/globus/libexec/grid-info-fs*
> /opt/globus/libexec/grid-info-mem*
> /opt/globus/libexec/grid-info-net*
> /opt/globus/libexec/grid-info-platform*
> /opt/globus/libexec/grid-info-os*
> /opt/globus/etc/grid-info-resource-ldif.conf
> /opt/globus/etc/grid-info-resource-register.conf
> /opt/globus/etc/grid-info-resource.schema
> /opt/globus/etc/grid.gridftpperf.schema
> /opt/globus/etc/gridftp-resource.conf
> /opt/globus/etc/gridftp-perf-info
> /opt/globus/etc/grid-info-slapd.conf
> /opt/globus/etc/grid-info-site-giis.conf
> /opt/globus/etc/grid-info-site-policy.conf
> /opt/globus/etc/grid-info-server-env.conf
> /opt/globus/etc/grid-info-deployment-comments.conf
> Done
> Creating gatekeeper configuration file...
> Done
> Creating state file directory.
> Done.
> Reading gatekeeper configuration file...
> Warning: Host cert file: /etc/grid-security/hostcert.pem not found.
> Re-run
> setup-globus-gram-job-manager after installing host cert file.
> Determining system information...
> Creating job manager configuration file...
> Done
> Setting up fork gram reporter in MDS
> -----------------------------------------
> Done
>
> Setting up pbs gram reporter in MDS
> ----------------------------------------
> configure: error: Cannot locate qstat
> loading cache /dev/null
> checking for qstat... no
> Error locating pbs commands, aborting!
> Setting up condor gram reporter in MDS
> ----------------------------------------
> configure: error: Cannot locate condor_q
> loading cache /dev/null
> checking for condor_q... no
> Error locating condor commands, aborting!
> Setting up lsf gram reporter in MDS
> ----------------------------------------
> configure: error: Cannot locate lsload
> loading cache /dev/null
> checking for lsload... no
> Error locating LSF commands, aborting!
> configure: warning: Cannot locate mpirun
> loading cache ./config.cache
> checking for mpirun... (cached) no
> creating ./config.status
> creating fork.pm
> configure: warning: Cannot locate mpirun
> configure: error: Cannot locate qdel
> loading cache /dev/null
> checking for mpirun... no
> checking for qdel... no
> Error locating PBS commands, aborting!
> configure: error: Cannot locate condor_submit
> loading cache /dev/null
> checking for condor_submit... no
> Error locating condor commands, aborting!
> configure: warning: Using default of /etc for LSF_ENVDIR
> configure: error: LSF configuration /etc/lsf.conf not found.
> loading cache /dev/null
> Error locating LSF commands, aborting!
> loading cache ./config.cache
> creating ./config.status
> creating grid-cert-request-config
> creating grid-security-config
> Configuring config_crl ...
> Configuring config_replica_manager ...
> Configuring config_edgusers ...
> Configuring config_users ...
> Configuring config_rgma ...
> Traceback (most recent call last):
> File "/opt/edg/sbin/edg-rgma-config", line 1004, in ?
> main()
> File "/opt/edg/sbin/edg-rgma-config", line 43, in main
> xmlFileCreator = XmlFileCreator(rgmaRoot, env.developer,
> var).create()
> File "/opt/edg/sbin/edg-rgma-config", line 240, in create
> self.__CanonicalProducerServletXml()
> File "/opt/edg/sbin/edg-rgma-config", line 270, in
> __CanonicalProducerServletXml
> self.__insertableSuperclassParam()
> File "/opt/edg/sbin/edg-rgma-config", line 398, in
> __insertableSuperclassParam
> jvmMemory = PropertyFileRdr(os.path.join(self.var.catalina_home,
> 'conf/tomcat4.conf'))('JAVA_OPTS', '-Xmx64m')
> File "/opt/edg/sbin/edg-rgma-config", line 948, in __init__
> handle = file(filename, 'r')
> IOError: [Errno 2] No such file or directory:
> '/var/tomcat4/conf/tomcat4.conf'
> Configuring config_workload_manager_env ...
> Configuration Complete
> Configuring config_torque_client ...
> Can't exec "/usr/bin/pbsnodes": No such file or directory at
> /opt/edg/sbin/edg-pbs-knownhosts line 32.
> Could note open /usr/bin/pbsnodes -a pipe: No such file or directory
> /opt/lcg/yaim/scripts/configure_WN_torque: line 60:
> /var/spool/pbs/mom_priv/config: No such file or directory
> error reading information on service pbs_mom: No such file or directory
> /opt/lcg/yaim/scripts/configure_WN_torque: line 70:
> /etc/rc.d/init.d/pbs_mom: No such file or directory
> /opt/lcg/yaim/scripts/configure_WN_torque: line 72:
> /etc/rc.d/init.d/pbs_mom: No such file or directory
> Configuration
> Complete
>
>
