Hi All
Approved Document M
Paragraph 9.5 - Requirement M1 will be satisfied if a building containing flats, in which a passenger lift is not to be installed, is provided with a suitable stair, which has:
a. all step nosings distinguishable through contrasting brightness;
b. top and bottom landings whose lengths are in accordance with Part K1;
c. steps with suitable tread nosing profiles (see Diagram 30) and uniform rise of each step, which is not more than 170mm;
d. uniform going of each step, which is not less than 250mm, which for tapered treads should be measured at a point 270mm from the inside of the tread;
e. risers which are not open; and
f. a suitable continuous handrail on each side of flights and landings if the rise of the stair comprises two or more rises.
Can it be true that the above requirements only apply where a passenger lift is not to be installed?
I would appreciate your views and comments please
Thank you
Keith Oakes
Gradus Ltd
----------End of Message----------
Run by SURFACE for more information on research, teaching and consultancy:
http://www.surface.salford.ac.uk
Archives for the Accessibuilt discussion list are located at http://www.jiscmail.ac.uk/lists/accessibuilt.html
|