Sent from Tim's iPad2 bleurgh
-----Original Message-----
From: psci-com: on public engagement with science [mailto:[log in to unmask]] On Behalf Of Tim Reynolds
Sent: 17 February 2012 13:46
To: [log in to unmask]
Subject: Re: [PSCI-COM] Typical scientist
Don't see what the fuss is about - clearly the distinguished scientist pictured is just about to depart her laboratory to attend a lavish evening scientific reception (possibly to receive an award?) and is wearing a strapless ball gown. Probably should change those gloves though.
Tim
Sent from Tim's iPad2
On 16 Feb 2012, at 23:02, "Marjoleine Georgette van der Meij" <[log in to unmask]> wrote:
> Absolutely fascinating this :)
> Now lets do the DAST (Draw A Scientist Test) again!!
>
> Grtz MG
>
>
>
> On 16 February 2012 19:35, stefano sandrelli
> <[log in to unmask]> wrote:
>> It is obviously a fake.
>>
>> If it was not, why did not Mr Silvio Berlusconi invest money in
>> reasearch?
>>
>> Happy it isn't, anyway!!
>>
>> :-D
>>
>> stefano
>>
>>
>>> If the message they're trying to convey is 'intelligent women are
>>> sexy', then they're doing it wrong. This woman is clearly an idiot.
>>> No one in their right mind would hold the obviously dangerous pink
>>> and purple blob formula and not wear at least a bra.
>>>
>>> 2012/2/16 Marianne Miles <[log in to unmask]>
>>>
>>>> You took the words right out of my mouth – I can verify this –
>>>> 3 children and a career in science and I look exactly the same…
>>>> honest…****
>>>>
>>>> ** **
>>>>
>>>> Marianne Miles
>>>> National Institute for Health Research Clinical Research Network
>>>> (NIHR
>>>> CRN)
>>>> Tel: 0113 3430440
>>>> Email: [log in to unmask]
>>>> Web: www.crncc.nihr.ac.uk****
>>>>
>>>> ** **
>>>>
>>>> *From:* psci-com: on public engagement with science [mailto:
>>>> [log in to unmask]] *On Behalf Of *Laura Walker
>>>> *Sent:* 16 February 2012 15:05
>>>>
>>>> *To:* [log in to unmask]
>>>> *Subject:* Re: [PSCI-COM] Typical scientist****
>>>>
>>>> ** **
>>>>
>>>> As a young, female scientists, I can verify that we all look like that.
>>>> Exactly.****
>>>>
>>>> On Thu, Feb 16, 2012 at 2:56 PM, Rebecca Hurwitz <
>>>> [log in to unmask]> wrote:****
>>>>
>>>> Hi all,****
>>>>
>>>> ****
>>>>
>>>> We were looking for suitable stock images of young female
>>>> scientists when we came across this (it’s part of a set). ****
>>>>
>>>> ****
>>>>
>>>> http://www.istockphoto.com/stock-photo-13771784-lab-work.php****
>>>>
>>>> ****
>>>>
>>>> So… Um, comments anyone…?****
>>>>
>>>> ****
>>>>
>>>> ****
>>>>
>>>> Becky****
>>>>
>>>> ****
>>>>
>>>> *Rebecca Hurwitz
>>>> *Graphic Science****
>>>>
>>>> [Part of The Training Group - *Supporting public engagement in the
>>>> research community*]****
>>>>
>>>> ( +44 (0)1275 474444
>>>> È +44 (0)7870 495774
>>>> › [log in to unmask]
>>>> : www.graphicscience.co.uk ****
>>>>
>>>> ****
>>>>
>>>> *******************************************************************
>>>> *** Further information about the psci-com discussion list,
>>>> including list archive, can be found at the list web site:
>>>> http://www.jiscmail.ac.uk/lists/psci-com.html You may also change
>>>> your settings and subscribe/unsubscribe to psci-com from the web
>>>> site. ****
>>>>
>>>> Psci-com is part of the National Academic Mailing List Service,
>>>> known as 'JISCMail'. It adheres to the JISCMail Acceptable Use Policy:
>>>> http://www.jiscmail.ac.uk/policyandsecurity/acceptableuse.html and
>>>> to the JISCMail guidelines for etiquette:
>>>> http://www.jiscmail.ac.uk/policyandsecurity/etiquette.html ****
>>>>
>>>> Email commands: 1. To suspend yourself from the list, whilst on
>>>> leave, for example, send an email to mailto:[log in to unmask]
>>>> with the following message: ****
>>>>
>>>> set psci-com nomail -- [include hyphens] ****
>>>>
>>>> 2. To resume email from the list, send an email to
>>>> [log in to unmask] the message:
>>>> ****
>>>>
>>>> set psci-com mail -- [include hyphens] ****
>>>>
>>>> 3. To leave psci-com, send an email to [log in to unmask] with
>>>> the
>>>> message: ****
>>>>
>>>> leave psci-com -- [include hyphens] ****
>>>>
>>>> Please allow up to 24 hours for these commands to activate.
>>>> Remember that you will need to send commands using the same email
>>>> address that you used to register on psci-com. To contact the
>>>> Psci-com list owner, please send an email to:
>>>> [log in to unmask] ****
>>>>
>>>> *******************************************************************
>>>> *******
>>>>
>>>>
>>>>
>>>> ****
>>>>
>>>> ** **
>>>>
>>>> --
>>>> Laura Walker,
>>>> Research Floor, Level 7
>>>> Bristol Royal Infirmary
>>>> Upper Maudlin Street
>>>> Bristol
>>>> BS2 8HW
>>>> UK
>>>>
>>>> 07891 428890
>>>>
>>>>
>>>> *******************************************************************
>>>> *** Further information about the psci-com discussion list,
>>>> including list archive, can be found at the list web site:
>>>> http://www.jiscmail.ac.uk/lists/psci-com.html You may also change
>>>> your settings and subscribe/unsubscribe to psci-com from the web
>>>> site. ****
>>>>
>>>> Psci-com is part of the National Academic Mailing List Service,
>>>> known as 'JISCMail'. It adheres to the JISCMail Acceptable Use Policy:
>>>> http://www.jiscmail.ac.uk/policyandsecurity/acceptableuse.html and
>>>> to the JISCMail guidelines for etiquette:
>>>> http://www.jiscmail.ac.uk/policyandsecurity/etiquette.html ****
>>>>
>>>> Email commands: 1. To suspend yourself from the list, whilst on
>>>> leave, for example, send an email to mailto:[log in to unmask]
>>>> with the following message: ****
>>>>
>>>> set psci-com nomail -- [include hyphens] ****
>>>>
>>>> 2. To resume email from the list, send an email to
>>>> [log in to unmask] the message:
>>>> ****
>>>>
>>>> set psci-com mail -- [include hyphens] ****
>>>>
>>>> 3. To leave psci-com, send an email to [log in to unmask] with
>>>> the
>>>> message: ****
>>>>
>>>> leave psci-com -- [include hyphens] ****
>>>>
>>>> Please allow up to 24 hours for these commands to activate.
>>>> Remember that you will need to send commands using the same email
>>>> address that you used to register on psci-com. To contact the
>>>> Psci-com list owner, please send an email to:
>>>> [log in to unmask] ****
>>>>
>>>> *******************************************************************
>>>> ***
>>>> ***
>>>> *
>>>> *******************************************************************
>>>> *** Further information about the psci-com discussion list,
>>>> including list archive, can be found at the list web site:
>>>> http://www.jiscmail.ac.uk/lists/psci-com.html You may also change
>>>> your settings and subscribe/unsubscribe to psci-com from the web site.
>>>>
>>>> Psci-com is part of the National Academic Mailing List Service,
>>>> known as 'JISCMail'. It adheres to the JISCMail Acceptable Use Policy:
>>>> http://www.jiscmail.ac.uk/policyandsecurity/acceptableuse.html and
>>>> to the JISCMail guidelines for etiquette:
>>>> http://www.jiscmail.ac.uk/policyandsecurity/etiquette.html
>>>>
>>>> Email commands: 1. To suspend yourself from the list, whilst on
>>>> leave, for example, send an email to mailto:[log in to unmask]
>>>> with the following message:
>>>>
>>>> set psci-com nomail -- [include hyphens]
>>>>
>>>> 2. To resume email from the list, send an email to
>>>> [log in to unmask] the message:
>>>>
>>>> set psci-com mail -- [include hyphens]
>>>>
>>>> 3. To leave psci-com, send an email to [log in to unmask] with
>>>> the
>>>> message:
>>>>
>>>> leave psci-com -- [include hyphens]
>>>>
>>>> Please allow up to 24 hours for these commands to activate.
>>>> Remember that you will need to send commands using the same email
>>>> address that you used to register on psci-com. To contact the
>>>> Psci-com list owner, please send an email to:
>>>> [log in to unmask]
>>>>
>>>> *******************************************************************
>>>> ***
>>>>
>>>
>>> ********************************************************************
>>> ** Further information about the psci-com discussion list, including
>>> list archive, can be found at the list web site:
>>> http://www.jiscmail.ac.uk/lists/psci-com.html
>>> You may also change your settings and subscribe/unsubscribe to
>>> psci-com from the web site.
>>>
>>> Psci-com is part of the National Academic Mailing List Service,
>>> known as 'JISCMail'.
>>> It adheres to the JISCMail Acceptable Use Policy:
>>> http://www.jiscmail.ac.uk/policyandsecurity/acceptableuse.html
>>> and to the JISCMail guidelines for etiquette:
>>> http://www.jiscmail.ac.uk/policyandsecurity/etiquette.html
>>>
>>> Email commands:
>>> 1. To suspend yourself from the list, whilst on leave, for example,
>>> send an email to mailto:[log in to unmask] with the following
>>> message:
>>>
>>> set psci-com nomail -- [include hyphens]
>>>
>>> 2. To resume email from the list, send an email to
>>> [log in to unmask] with the message:
>>>
>>> set psci-com mail -- [include hyphens]
>>>
>>> 3. To leave psci-com, send an email to [log in to unmask] with
>>> the
>>> message:
>>>
>>> leave psci-com -- [include hyphens]
>>>
>>> Please allow up to 24 hours for these commands to activate.
>>> Remember that you will need to send commands using the same email
>>> address that you used to register on psci-com.
>>> To contact the Psci-com list owner, please send an email to:
>>> [log in to unmask]
>>>
>>> ********************************************************************
>>> **
>>>
>>
>> *********************************************************************
>> * Further information about the psci-com discussion list, including
>> list archive, can be found at the list web site:
>> http://www.jiscmail.ac.uk/lists/psci-com.html
>> You may also change your settings and subscribe/unsubscribe to psci-com from the web site.
>>
>> Psci-com is part of the National Academic Mailing List Service, known as 'JISCMail'.
>> It adheres to the JISCMail Acceptable Use Policy:
>> http://www.jiscmail.ac.uk/policyandsecurity/acceptableuse.html
>> and to the JISCMail guidelines for etiquette:
>> http://www.jiscmail.ac.uk/policyandsecurity/etiquette.html
>>
>> Email commands:
>> 1. To suspend yourself from the list, whilst on leave, for example,
>> send an email to mailto:[log in to unmask] with the following message:
>>
>> set psci-com nomail -- [include hyphens]
>>
>> 2. To resume email from the list, send an email to [log in to unmask] with the message:
>>
>> set psci-com mail -- [include hyphens]
>>
>> 3. To leave psci-com, send an email to [log in to unmask] with the message:
>>
>> leave psci-com -- [include hyphens]
>>
>> Please allow up to 24 hours for these commands to activate.
>> Remember that you will need to send commands using the same email address that you used to register on psci-com.
>> To contact the Psci-com list owner, please send an email to:
>> [log in to unmask]
>>
>> *********************************************************************
>> *
>
>
>
> --
> drs. ir. M.G. van der Meij
> Design, Sustainability & Communication Research & Consultancy
> www.mgvandermeij.nl
> 06 48 95 76 56
>
> **********************************************************************
> Further information about the psci-com discussion list, including list
> archive, can be found at the list web site:
> http://www.jiscmail.ac.uk/lists/psci-com.html
> You may also change your settings and subscribe/unsubscribe to psci-com from the web site.
>
> Psci-com is part of the National Academic Mailing List Service, known as 'JISCMail'.
> It adheres to the JISCMail Acceptable Use Policy:
> http://www.jiscmail.ac.uk/policyandsecurity/acceptableuse.html
> and to the JISCMail guidelines for etiquette:
> http://www.jiscmail.ac.uk/policyandsecurity/etiquette.html
>
> Email commands:
> 1. To suspend yourself from the list, whilst on leave, for example,
> send an email to mailto:[log in to unmask] with the following message:
>
> set psci-com nomail -- [include hyphens]
>
> 2. To resume email from the list, send an email to [log in to unmask] with the message:
>
> set psci-com mail -- [include hyphens]
>
> 3. To leave psci-com, send an email to [log in to unmask] with the message:
>
> leave psci-com -- [include hyphens]
>
> Please allow up to 24 hours for these commands to activate.
> Remember that you will need to send commands using the same email address that you used to register on psci-com.
> To contact the Psci-com list owner, please send an email to:
> [log in to unmask]
>
> **********************************************************************
**********************************************************************
Further information about the psci-com discussion list, including list archive, can be found at the list web site: http://www.jiscmail.ac.uk/lists/psci-com.html
You may also change your settings and subscribe/unsubscribe to psci-com from the web site.
Psci-com is part of the National Academic Mailing List Service, known as 'JISCMail'.
It adheres to the JISCMail Acceptable Use Policy: http://www.jiscmail.ac.uk/policyandsecurity/acceptableuse.html
and to the JISCMail guidelines for etiquette: http://www.jiscmail.ac.uk/policyandsecurity/etiquette.html
Email commands:
1. To suspend yourself from the list, whilst on leave, for example, send an email to mailto:[log in to unmask] with the following message:
set psci-com nomail -- [include hyphens]
2. To resume email from the list, send an email to [log in to unmask] with the message:
set psci-com mail -- [include hyphens]
3. To leave psci-com, send an email to [log in to unmask] with the message:
leave psci-com -- [include hyphens]
Please allow up to 24 hours for these commands to activate.
Remember that you will need to send commands using the same email address that you used to register on psci-com.
To contact the Psci-com list owner, please send an email to: [log in to unmask]
**********************************************************************
**********************************************************************
Further information about the psci-com discussion list, including list archive, can be found at the list web site: http://www.jiscmail.ac.uk/lists/psci-com.html
You may also change your settings and subscribe/unsubscribe to psci-com from the web site.
Psci-com is part of the National Academic Mailing List Service, known as 'JISCMail'.
It adheres to the JISCMail Acceptable Use Policy: http://www.jiscmail.ac.uk/policyandsecurity/acceptableuse.html
and to the JISCMail guidelines for etiquette: http://www.jiscmail.ac.uk/policyandsecurity/etiquette.html
Email commands:
1. To suspend yourself from the list, whilst on leave, for example,
send an email to mailto:[log in to unmask] with the following message:
set psci-com nomail -- [include hyphens]
2. To resume email from the list, send an email to [log in to unmask] with the message:
set psci-com mail -- [include hyphens]
3. To leave psci-com, send an email to [log in to unmask] with the message:
leave psci-com -- [include hyphens]
Please allow up to 24 hours for these commands to activate.
Remember that you will need to send commands using the same email address that you used to register on psci-com.
To contact the Psci-com list owner, please send an email to: [log in to unmask]
**********************************************************************
|