|
On Tue, 4 Aug 2009, Roderick Johnstone wrote:
> I'm having some problems with the linux x86_64 bit install of nanahope on
> Fedora 10.
>
> Some commands like kappa work:
> linux> kappa
>
>
> KAPPA commands are now available -- (Version 1.10-10)
>
> Type kaphelp for help on KAPPA commands.
> Type 'showme sun95' to browse the hypertext documentation.
>
> NOTE, several applications have had major changes made to their
> parameter lists. See the 'Release Notes' section of SUN/95 for
> details.
>
> But others don't, like:
> linux> figaro
> bash: /figaro/figaro.sh: No such file or directory
>
> I think the problem is in star-nanahope/etc/profile. In the second figaro
> setup section figaro is defined as:
>
> figaro () { . ${bindir}/figaro/figaro.sh; }
>
> but bindir is not defined at run time.
>
> kappa is defined like:
> kappa () { . $KAPPA_DIR/kappa.sh; }
>
> and KAPPA_DIR is defined at run time
Hi Roderick,
thanks for the report. Tim stopped the export of $bindir so a few package
initialisation commands have been broken like FIGARO (EXTRACTOR, DIPSO and
DATACUBE). I've fixed this in the attached "profile" which should get you
working again. Just replace your existing file.
Brad, committed to master as 3dabcb41270 if you want to issue an official
patch.
Cheers,
Peter.
--
Peter W. Draper, http://astro.dur.ac.uk/~pdraper
# -*- Shell-Script -*-
# File: /loc/pwdb/pdraper/starlink_git/build/etc/profile
# Init Version: 1.1-27
# From CVS $Revision$
# This file must be sourced before Starlink software can be used.
# This script contains environment and alias definitions and must
# be sourced rather than executed. It is suitable for use from a bash
# shell
# This can be achieved by adding the line:
#
# source /loc/pwdb/pdraper/starlink_git/build/etc/profile
#
# to your .profile file. for the ultra paranoid, add a check for file
# existence as well.
# Break the file up along the lines of the cshrc and login rather
# than combining tests into a single block.
# Make ${1+"$@"} portability feature work on zsh, too.
test "${ZSH_VERSION+set}" = set && alias -g '${1+"$@"}'='"$@"'
# To simplify relocation use local variables rather than using the
# /loc/pwdb/pdraper/starlink_git/build/bin everywhere
relocate=0
if test "${STARLINK_DIR}" != ""; then
if [ -e ${STARLINK_DIR} ]; then
if test "${STARLINK_DIR}" != "/loc/pwdb/pdraper/starlink_git/build"; then
if [ -e ${STARLINK_DIR}/bin ]; then
relocate=1
fi
fi
fi
fi
if [ ${relocate} -ne 0 ]; then
exec_prefix=${STARLINK_DIR}
bindir=${exec_prefix}/bin
staretcdir=${exec_prefix}/etc
starhelpdir=${exec_prefix}/help
libdir=${exec_prefix}/lib
sharelibdir=${exec_prefix}/lib
datadir=${exec_prefix}/share
mandir=${exec_prefix}/man
starjavadir=${exec_prefix}/starjava
else
export STARLINK_DIR=/loc/pwdb/pdraper/starlink_git/build
exec_prefix=/loc/pwdb/pdraper/starlink_git/build
bindir=/loc/pwdb/pdraper/starlink_git/build/bin
staretcdir=/loc/pwdb/pdraper/starlink_git/build/etc
starhelpdir=/loc/pwdb/pdraper/starlink_git/build/help
libdir=/loc/pwdb/pdraper/starlink_git/build/lib
sharelibdir=/loc/pwdb/pdraper/starlink_git/build/lib
datadir=/loc/pwdb/pdraper/starlink_git/build/share
mandir=/loc/pwdb/pdraper/starlink_git/build/man
starjavadir=/loc/pwdb/pdraper/starlink_git/build/starjava
fi
# Add Starlink directories to relevant paths.
tmppath="${PATH}"
if((`echo ${tmppath} | grep -c ':${bindir}/startcl:'`)); then
tmppath=`echo ${tmppath} | sed -e 's#:${bindir}/startcl:#:#g'`
fi
if((`echo ${tmppath} | grep -c ':${bindir}/startcl$'`)); then
tmppath=`echo ${tmppath} | sed -e 's#:${bindir}/startcl##g'`
fi
if((`echo ${tmppath} | grep -c '^${bindir}/startcl'`)); then
tmppath=`echo ${tmppath} | sed -e 's#${bindir}/startcl:##g'`
fi
if((`echo ${tmppath} | grep -c ':${bindir}:'`)); then
tmppath=`echo ${tmppath} | sed -e 's#:${bindir}:#:#g'`
fi
if((`echo ${tmppath} | grep -c ':${bindir}$'`)); then
tmppath=`echo ${tmppath} | sed -e 's#:${bindir}##g'`
fi
if((`echo ${tmppath} | grep -c '^${bindir}'`)); then
tmppath=`echo ${tmppath} | sed -e 's#${bindir}:##g'`
fi
if((`echo ${tmppath} | grep -c ':${starjavadir}/bin:'`)); then
tmppath=`echo ${tmppath} | sed -e 's#:${starjavadir}/bin:#:#g'`
fi
if((`echo ${tmppath} | grep -c ':${starjavadir}/bin$'`)); then
tmppath=`echo ${tmppath} | sed -e 's#:${starjavadir}/bin##g'`
fi
if((`echo ${tmppath} | grep -c '^${starjavadir}/bin'`)); then
tmppath=`echo ${tmppath} | sed -e 's#${starjavadir}:##g'`
fi
export PATH="${tmppath}:${bindir}/startcl:${bindir}:${starjavadir}/bin"
#
# Prepend Starlink JRE (and JDK) paths to PATH.
# Do JRE after JDK so that the JRE takes precidence.
JREHOME=${exec_prefix}/java/jre/bin
JDKHOME=${exec_prefix}/java/bin
if test -d ${JDKHOME}; then
export PATH="${JDKHOME}:${PATH}"
fi
if test -d ${JREHOME}; then
export PATH="${JREHOME}:${PATH}"
fi
unset JREHOME JDKHOME
# Check if LD_LIBRARY_PATH is set, needed on all platforms
# that have shareable libraries, plus all platforms that
# have Java JNI libraries.
# Is LD_LIBRARY_PATH set?
if test "${LD_LIBRARY_PATH}" != ""; then
# LD_LIBRARY_PATH is set. Search it for required components and
# Set appropriate flag variables.
found_sharelib="no"
if test "`echo ${LD_LIBRARY_PATH} | grep -c ':${sharelibdir}'`" != "0"; then
found_sharelib="yes"
fi
if test "`echo ${LD_LIBRARY_PATH} | grep -c '^${sharelibdir}'`" != "0"; then
found_sharelib="yes"
fi
# Add required components to end of LD_LIBRARY_PATH if flag variables
# indicate they are not present.
if test "$found_sharelib" == "no"; then
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${sharelibdir}"
case "x86_64-unknown-linux-gnu" in
*-osf*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/alpha"
;;
x86_64*-linux*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/amd64"
;;
*-linux*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/i386"
;;
*-cygwin*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/x86"
;;
*-sun*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/sparc"
;;
*pc-apple-darwin*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/ppc"
;;
*86*-apple-darwin*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/i386"
;;
esac
fi
else
# LD_LIBRARY_PATH is not set. Add required components.
export LD_LIBRARY_PATH=${sharelibdir}
case "x86_64-unknown-linux-gnu" in
*-osf*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/alpha"
;;
x86_64*-linux*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/amd64"
;;
*-linux*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/i386"
;;
*-cygwin*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/x86"
;;
*-sun*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:/usr/openwin/lib:${starjavadir}/lib/sparc"
;;
*pc-apple-darwin*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/ppc"
;;
*86*-apple-darwin*)
export LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${starjavadir}/lib/i386"
;;
esac
fi
# Define the Starlink environment first
# ATOOLS
if test -f ${bindir}/atools/atools.sh; then
export ATOOLS_DIR=${bindir}/atools
export ATOOLS_HELP=${starhelpdir}/atools/atools
fi
# AUTOASTROM
if test -f ${exec_prefix}/Perl/bin/autoastrom; then
export AUTOASTROM_DIR=${exec_prefix}/Perl/bin
fi
# CCDPACK
if test -f ${bindir}/ccdpack/ccdpack.sh; then
export CCDPACK_DIR=${bindir}/ccdpack
export CCDPACK_HELP=${starhelpdir}/ccdpack/ccdpack
fi
# Convert
if test -f ${bindir}/convert/convert.sh; then
export CONVERT_DIR=${bindir}/convert
export CONVERT_HELP=${starhelpdir}/convert/convert
fi
# CUPID
if test -f ${bindir}/cupid/cupid.sh; then
export CUPID_DIR=${bindir}/cupid
export CUPID_HELP=${starhelpdir}/cupid/cupid
fi
# DATACUBE
if test -f ${bindir}/datacube/datacube.csh; then
export DATACUBE_DIR=${bindir}/datacube
export DATACUBE_HELP=${starhelpdir}/datacube/datacube
fi
# ESP
if test -f ${bindir}/esp/esp.sh; then
export ESP_DIR=${bindir}/esp
export ESP_HELP=${starhelpdir}/esp/esp
fi
#
# EXTRACTOR
if test -f ${bindir}/extractor/extractor.sh; then
export EXTRACTOR_DIR=${bindir}/extractor
export EXTRACTOR_HELP=${starhelpdir}/extractor/extractor
fi
# FIGARO
if test -f ${bindir}/figaro/figaro.csh; then
export FIG_DIR=${bindir}/figaro
export FIG_HELP=${starhelpdir}/figaro/figaro
export FIG_HTML=${exec_prefix}/docs/sun86.htx
export FIGARO_FORMATS="ndf,dst"
export FIGARO_PROG_S=${staretcdir}/figaro
export FIGARO_PROG_N=${bindir}/figaro
fi
# Fluxes - note that we can run with fluxes.csh
# (assuming that csh exists on the system)
if test -f ${bindir}/fluxes/fluxes.csh; then
export FLUXES_DIR=${bindir}/fluxes
fi
# GAIA
if test -f ${bindir}/gaia/gaia.sh; then
export GAIA_DIR=${bindir}/gaia
fi
# HDSTOOLS
if test -f ${bindir}/hdstools/hdstools.sh; then
export HDSTOOLS_DIR=${bindir}/hdstools
export HDSTOOLS_HELP=${starhelpdir}/hdstools/hdstools
fi
# HDSTRACE
if test -f ${bindir}/hdstrace; then
export HDSTRACE_DIR=${bindir}
export HDSTRACE_HELP=${starhelpdir}/hdstrace
fi
# ICL
if test -f ${bindir}/icl; then
export ADAM_PACKAGES=${starhelpdir}/adam_packages.shl
export ICL_LOGIN_SYS=${staretcdir}/icl_login_sys.icl
fi
# JPL
if test -f ${staretcdir}/jpleph.dat; then
export JPL_DIR=${staretcdir}
fi
# Kappa
if test -f ${bindir}/kappa/kappa.sh; then
export KAPPA_DIR=${bindir}/kappa
export KAPPA_HELP=${starhelpdir}/kappa/kappa
fi
# Kappa Retirement Home (kaprh)
if test -f ${bindir}/kaprh/kaprh.sh; then
export KAPRH_DIR=${bindir}/kaprh
export KAPRH_HELP=${starhelpdir}/kaprh/kaprh
fi
# ORAC-DR
if test -f ${bindir}/oracdr/src/etc/oracdr_start.sh; then
export ORAC_DIR=${bindir}/oracdr/src
export ORAC_PERL5LIB=${ORAC_DIR}/lib/perl5
export ORAC_CAL_ROOT=${bindir}/oracdr/cal
else
if test -f ${bindir}/oracdr/etc/oracdr_start.sh; then
export ORAC_DIR=${bindir}/oracdr
export ORAC_PERL5LIB=${ORAC_DIR}/lib/perl5
export ORAC_CAL_ROOT=${ORAC_DIR}/cal
fi
fi
# PERIOD
if test -f ${bindir}/period/period; then
export PERIOD_DIR=${bindir}/period
export PERIOD_HELP=${starhelpdir}/period
fi
# PERL
if [ ${relocate} -ne 0 ]; then
export PERL5LIB=${exec_prefix}/Perl/lib/perl5/site_perl
export PERL5LIB=${exec_prefix}/Perl/lib/perl5/:${PERL5LIB}
fi
# PGPLOT
if test -z "${PGPLOT_DIR}"; then
export PGPLOT_DIR=${bindir}/
fi
# PHOTOM
if test -f ${bindir}/photom/photom.sh; then
export PHOTOM_DIR=${bindir}/photom
export PHOTOM_HELP=${starhelpdir}/photom/photomhelp
fi
# Polpack
if test -f ${bindir}/polpack/polpack.sh; then
export POLPACK_DIR=${bindir}/polpack
export POLPACK_HELP=${starhelpdir}/polpack/polpack
fi
#
# PONGO
#
if test -f ${bindir}/pongo/pongo.icl; then
export PONGO_BIN=${bindir}/pongo
export PONGO_HELP=${starhelpdir}/pongo/pongohelp
export PONGO_EXAMPLES=${datadir}/pongo
fi
# SMURF
if test -f ${bindir}/smurf/smurf.sh; then
export SMURF_DIR=${bindir}/smurf
export SMURF_HELP=${starhelpdir}/smurf/smurf
fi
#
# SOURCEPLOT
if test -f ${exec_prefix}/Perl/etc/poi.dat; then
export SPLOT_CAT=${exec_prefix}/Perl/etc/poi.dat
fi
#
# SPECX
#
if test -f ${datadir}/specx/specxstart.sh; then
export SYS_SPECX=${datadir}/specx
export SPECX_HELP=${starhelpdir}/specx
fi
# SPLAT
if test -f ${starjavadir}/bin/splat/splat; then
export SPLAT_DIR=${starjavadir}/bin/splat
fi
# SST
if test -f ${bindir}/sst/sst.sh; then
export SST_DIR=${bindir}/sst
export SST_HELP=${starhelpdir}/sst/sst
fi
# STARBENCH
if test -f ${bindir}/starbench/starbench.sh; then
export BENCH_DIR=${bindir}/starbench
fi
# STARMAN
if test -f ${bindir}/starman/starman.sh; then
export STARMAN_DIR=${bindir}/starman
export STARMAN_HELP=${starhelpdir}/starman
export STARMAN_DATA=${staretcdir}/starman
fi
# STILTS
if test -x ${starjavadir}/bin/stilts; then
export STILTS_DIR=${starjavadir}/bin/stilts
fi
# SURF
if test -f ${bindir}/surf/surf.sh; then
export SURF_DIR=${bindir}/surf
export SURF_HELP=${starhelpdir}/surf/surf
fi
# TSP
if test -f ${bindir}/tsp/tsp.sh; then
export TSP_DIR=${bindir}/tsp
fi
# Aliases
# Use sh functions rather than bash aliases for improved
# portability. Use 'declare -F' in bash to list all the functions.
# ATOOLS
if test -f ${bindir}/atools/atools.sh; then
atools () { . $ATOOLS_DIR/atools.sh; }
atools () { . $ATOOLS_DIR/atools.sh; }
else
atools () { ${staretcdir}/notinst atools; }
atoolssetup () { ${staretcdir}/notinst atools; }
fi
# AUTOASTROM
if test -f ${exec_prefix}/Perl/bin/autoastrom; then
autoastrom () { ${exec_prefix}/Perl/bin/perl $AUTOASTROM_DIR/autoastrom; }
else
autoastrom () { ${staretcdir}/notinst autoastrom; }
fi
# CCDPACK
if test -f ${bindir}/ccdpack/ccdpack.sh; then
ccdpack () { . $CCDPACK_DIR/ccdpack.sh; }
ccdpacksetup () { . $CCDPACK_DIR/ccdpack.sh; }
else
ccdpack () { ${staretcdir}/notinst ccdpack; }
ccdpacksetup () { ${staretcdir}/notinst ccdpack; }
fi
# CONVERT
if test -f ${bindir}/convert/convert.sh; then
convert () { . $CONVERT_DIR/convert.sh; }
convertsetup () { . $CONVERT_DIR/convert.sh; }
else
convert () { ${staretcdir}/notinst convert; }
convertsetup () { ${staretcdir}/notinst convert; }
fi
# CUPID
if test -f ${bindir}/cupid/cupid.sh; then
cupid () { . $CUPID_DIR/cupid.sh; }
cupidsetup () { . $CUPID_DIR/cupid.sh; }
else
cupid () { ${staretcdir}/notinst cupid; }
cupidsetup () { ${staretcdir}/notinst cupid; }
fi
# DATACUBE
if test -f ${bindir}/datacube/datacube.sh; then
datacube () { . $DATACUBE_DIR/datacube.sh; }
datacubestart () { . $DATACUBE_DIR/datacube.sh; }
datacubesetup () { . $DATACUBE_DIR/datacube.sh; }
else
datacube () { ${staretcdir}/notinst datacube; }
datacubestart () { ${staretcdir}/notinst datacubestart; }
datacubesetup () { ${staretcdir}/notinst datacubesetup; }
fi
# DIPSO
if test -f ${bindir}/dipso/dipsosetup.sh; then
export DIPSODIR=${bindir}/dipso
dipsosetup () { . $DIPSODIR/dipsosetup.sh; }
dipso () { . $DIPSODIR/dipsosetup.sh; }
else
dipsosetup () { ${staretcdir}/notinst dipsosetup; }
dipso () { ${staretcdir}/notinst dipso; }
fi
# ESP
if test -f ${bindir}/esp/esp.sh; then
esp () { . $ESP_DIR/esp.sh; }
espsetup () { . $ESP_DIR/esp.sh; }
else
esp () { ${staretcdir}/notinst esp; }
espsetup () { ${staretcdir}/notinst esp; }
fi
#
# Extractor
#
if test -f ${bindir}/extractor/extractor.sh; then
extractorsetup () { . $EXTRACTOR_DIR/extractor.sh; }
extractsetup () { . $EXTRACTOR_DIR/extractor.sh; }
extractor () { . $EXTRACTOR_DIR/extractor.sh; }
extract () { . $EXTRACTOR_DIR/extractor.sh; }
else
extractorsetup () { ${staretcdir}/notinst extractorsetup; }
extractsetup () { ${staretcdir}/notinst extractsetup; }
extractor () { ${staretcdir}/notinst extractor; }
extract () { ${staretcdir}/notinst extract; }
fi
# FIGARO
if test -f ${bindir}/figaro/figaro.sh; then
figaro () { . $FIG_DIR/figaro.sh; }
figarosetup () { . $FIG_DIR/figaro.sh; }
specdre () { . $FIG_DIR/specdre.sh; }
specdresetup () { . $FIG_DIR/specdre.sh; }
twodspec () { . $FIG_DIR/twodspec.sh; }
twodspecsetup () { . $FIG_DIR/twodspec.sh; }
else
figaro () { ${staretcdir}/notinst figaro; }
figarosetup () { ${staretcdir}/notinst figarosetup; }
specdre () { ${staretcdir}/notinst specdre; }
specdresetup () { ${staretcdir}/notinst specdresetup; }
twodspec () { ${staretcdir}/notinst twodspec; }
twodspecsetup () { ${staretcdir}/notinst twodspecsetup; }
fi
# Fluxes
if test -f ${bindir}/fluxes/fluxes; then
fluxes () { $FLUXES_DIR/fluxes.csh; }
fluxnow () { $FLUXES_DIR/fluxnow.csh; }
else
fluxes () { ${staretcdir}/notinst fluxes; }
fluxnow () { ${staretcdir}/notinst fluxnow; }
fi
#
# Gaia
#
if test -f ${bindir}/gaia/gaia.sh; then
gaia () { $GAIA_DIR/gaia.sh ${1+"$@"}; }
gaiadisp () { $GAIA_DIR/gaiadisp.sh ${1+"$@"}; }
else
gaia () { ${staretcdir}/notinst gaia; }
gaiadisp () { ${staretcdir}/notinst gaiadisp; }
fi
# Kappa
if test -f ${bindir}/kappa/kappa.sh; then
kappa () { . $KAPPA_DIR/kappa.sh; }
kappasetup () { . $KAPPA_DIR/kappa.sh; }
else
kappa () { ${staretcdir}/notinst kappa; }
kappasetup () { ${staretcdir}/notinst kappa; }
fi
# Kappa Retirement Home (KAPRH)
if test -f ${bindir}/kaprh/kaprh.sh; then
kaprh () { . $KAPRH_DIR/kaprh.sh; }
kaprhsetup () { . $KAPRH_DIR/kaprh.sh; }
else
kaprh () { ${staretcdir}/notinst kaprh; }
kaprhsetup () { ${staretcdir}/notinst kaprh; }
fi
# HDSTOOLS
if test -f ${bindir}/hdstools/hdstools.sh; then
hdstools () { . $HDSTOOLS_DIR/hdstools.sh; }
hdstoolssetup () { . $HDSTOOLS_DIR/hdstools.sh; }
else
hdstools () { ${staretcdir}/notinst hdstools; }
hdstoolssetup () { ${staretcdir}/notinst hdstools; }
fi
# ORAC-DR
if test -f ${bindir}/oracdr/src/etc/profile; then
source ${bindir}/oracdr/src/etc/profile
else
if test -f ${bindir}/oracdr/etc/profile; then
source ${bindir}/oracdr/etc/profile
else
oracdr_acsis () { ${staretcdir}/notinst oracdr_acsis; }
oracdr_cgs4 () { ${staretcdir}/notinst oracdr_cgs4; }
oracdr_classiccam () { ${staretcdir}/notinst oracdr_classiccam; }
oracdr_gmos () { ${staretcdir}/notinst oracdr_gmos; }
oracdr_ingrid () { ${staretcdir}/notinst oracdr_ingrid; }
oracdr_ircam () { ${staretcdir}/notinst oracdr_ircam; }
oracdr_ircam_old () { ${staretcdir}/notinst oracdr_ircam_old; }
oracdr_iris2 () { ${staretcdir}/notinst oracdr_iris2; }
oracdr_isaac () { ${staretcdir}/notinst oracdr_isaac; }
oracdr_michelle () { ${staretcdir}/notinst oracdr_michelle; }
oracdr_naco () { ${staretcdir}/notinst oracdr_naco; }
oracdr_niri () { ${staretcdir}/notinst oracdr_niri; }
oracdr_scuba () { ${staretcdir}/notinst oracdr_scuba; }
oracdr_scuba2l () { ${staretcdir}/notinst oracdr_scuba2l; }
oracdr_scuba2s () { ${staretcdir}/notinst oracdr_scuba2s; }
oracdr_scuba2lq () { ${staretcdir}/notinst oracdr_scuba2lq; }
oracdr_scuba2sq () { ${staretcdir}/notinst oracdr_scuba2sq; }
oracdr_sofi () { ${staretcdir}/notinst oracdr_sofi; }
oracdr_spex () { ${staretcdir}/notinst oracdr_spex; }
oracdr_swfcam () { ${staretcdir}/notinst oracdr_swfcam; }
oracdr_swfcam1 () { ${staretcdir}/notinst oracdr_swfcam1; }
oracdr_swfcam2 () { ${staretcdir}/notinst oracdr_swfcam2; }
oracdr_swfcam3 () { ${staretcdir}/notinst oracdr_swfcam3; }
oracdr_swfcam4 () { ${staretcdir}/notinst oracdr_swfcam4; }
oracdr_ufti () { ${staretcdir}/notinst oracdr_ufti; }
oracdr_ufti_old () { ${staretcdir}/notinst oracdr_ufti_old; }
oracdr_uist () { ${staretcdir}/notinst oracdr_uist; }
xoracdr () { ${staretcdir}/notinst xoracdr; }
fi
fi
# Polpack
if test -f ${bindir}/polpack/polpack.sh; then
polpack () { . $POLPACK_DIR/polpack.sh; }
polpacksetup () { . $POLPACK_DIR/polpack.sh; }
else
polpack () { ${staretcdir}/notinst polpack; }
polpacksetup () { ${staretcdir}/notinst polpack; }
fi
#
# Photom
#
if test -f ${bindir}/photom/photom.sh; then
photomstart () { . $PHOTOM_DIR/photom.sh; }
photom () { . $PHOTOM_DIR/photom.sh; }
photomsetup () { . $PHOTOM_DIR/photom.sh; }
else
photomstart () { ${staretcdir}/notinst photomstart; }
photom () { ${staretcdir}/notinst photom; }
photomsetup () { ${staretcdir}/notinst photomsetup; }
fi
#
# Pongo
#
if test -f ${bindir}/pongo/pongo.icl; then
pongo () { icl $PONGO_BIN/pongo; }
else
pongo () { ${staretcdir}/notinst pongo; }
fi
# SMURF - SCUBA-2 SURF
if test -f ${bindir}/smurf/smurf.sh; then
smurf () { . $SMURF_DIR/smurf.sh; }
smurfsetup () { . $SMURF_DIR/smurf.sh; }
else
smurf () { ${staretcdir}/notinst smurf; }
smurfsetup () { ${staretcdir}/notinst smurf; }
fi
#
# SPECX
#
if test -f ${datadir}/specx/specxstart.sh; then
specx () { . $SYS_SPECX/specxstart.sh; command specx; }
specxsetup () { . $SYS_SPECX/specxstart.sh; }
specxstart () { . $SYS_SPECX/specxstart.sh; }
else
specx () { ${staretcdir}/notinst specx; }
specxsetup () { ${staretcdir}/notinst specxsetup; }
specxstart () { ${staretcdir}/notinst specxstart; }
fi
# SPLAT
if test -f ${starjavadir}/bin/splat/splat; then
splat () { $SPLAT_DIR/splat ${1+"$@"}; }
splatdisp () { $SPLAT_DIR/splatdisp ${1+"$@"}; }
splatdispmany () { $SPLAT_DIR/splatdispmany ${1+"$@"}; }
else
splat () { ${staretcdir}/notinst splat; }
splatdisp () { ${staretcdir}/notinst splat; }
splatdispmany () { ${staretcdir}/notinst splat; }
fi
# SST
if test -f ${bindir}/sst/sst.sh; then
sst () { . $SST_DIR/sst.sh; }
sstsetup () { . $SST_DIR/sst.sh; }
else
sst () { ${staretcdir}/notinst sst; }
sstsetup () { ${staretcdir}/notinst sst; }
fi
# STARBENCH
if test -f ${bindir}/starbench/starbench.sh; then
starbench () { . $BENCH_DIR/starbench.sh; }
else
starbench () { ${staretcdir}/notinst starbench; }
fi
# STARMAN
if test -f ${bindir}/starman/starman.sh; then
starman () { . $STARMAN_DIR/starman.sh; }
starmansetup () { . $STARMAN_DIR/starman.sh; }
else
starman () { ${staretcdir}/notinst starman; }
starmansetup () { ${staretcdir}/notinst starman; }
fi
# SURF
if test -f ${bindir}/surf/surf.sh; then
surf () { . $SURF_DIR/surf.sh; }
surfsetup () { . $SURF_DIR/surf.sh; }
else
surf () { ${staretcdir}/notinst surf; }
surfsetup () { ${staretcdir}/notinst surf; }
fi
# TSP
if test -f ${bindir}/tsp/tsp.sh; then
tsp () { . $TSP_DIR/tsp.sh; }
tspsetup () { . $TSP_DIR/tsp.sh; }
else
tsp () { ${staretcdir}/notinst tsp; }
tspsetup () { ${staretcdir}/notinst tsp; }
fi
#
# Unset local shell variables to prevent them from leaking out
unset exec_prefix
unset bindir
unset staretcdir
unset starhelpdir
unset libdir
unset sharelibdir
unset datadir
unset mandir
unset starjavadir
#
# ADAM_ABBRV environment variable to allow abbreviated parameters.
export ADAM_ABBRV=1
# 64-bit mode for HDS
export HDS_64BIT=1
# Done
export STAR_LOGIN=''
|
