Hi Steve,
Update 32 to gLite-3.0 brought it to all nodes (on gLite-3.1 WNs it was from
the beginning). It was released on 22 August:
http://glite.web.cern.ch/glite/packages/R3.0/updates.asp
Regards, Antun
-----
Antun Balaz
Research Assistant
E-mail: [log in to unmask]
Web: http://scl.phy.bg.ac.yu/
Phone: +381 11 3713152
Fax: +381 11 3162190
Scientific Computing Laboratory
Institute of Physics, Belgrade, Serbia
-----
---------- Original Message -----------
From: "Fisher, SM (Steve)" <[log in to unmask]>
To: [log in to unmask]
Sent: Wed, 29 Aug 2007 09:41:20 +0100
Subject: Re: [LCG-ROLLOUT] Starting rgma-gin
> When was yaim 3.1.1 released?
>
> > -----Original Message-----
> > From: LHC Computer Grid - Rollout
> > [mailto:[log in to unmask]] On Behalf Of Antun Balaz
> > Sent: 29 August 2007 08:28
> > To: [log in to unmask]
> > Subject: Re: [LCG-ROLLOUT] Starting rgma-gin
> >
> > Thanks for the update, Steve!
> >
> > Note that rgma-gin is currently not working on any of
> > servers, at least on
> > those configured after the latest yaim-3.1.1 was introduced...
> >
> > Best regards, Antun
> >
> > -----
> > Antun Balaz
> > Research Assistant
> > E-mail: [log in to unmask]
> > Web: http://scl.phy.bg.ac.yu/
> >
> > Phone: +381 11 3713152
> > Fax: +381 11 3162190
> >
> > Scientific Computing Laboratory
> > Institute of Physics, Belgrade, Serbia
> > -----
> >
> > ---------- Original Message -----------
> > From: "Fisher, SM (Steve)" <[log in to unmask]>
> > To: [log in to unmask]
> > Sent: Tue, 28 Aug 2007 23:58:22 +0100
> > Subject: Re: [LCG-ROLLOUT] Starting rgma-gin
> >
> > > Antun,
> > >
> > > Antony is best able to explain what has gone wrong here -
> > however he
> > > was on the road today. Currently gin should be running on
> > most servers.
> > > However we do have a patch https://savannah.cern.ch/patch/?1093
> > > which is curently being certified that will result in gin
> > being only
> > > run on the mon box and picking up its data from the site BDII - but
> > > for now it should be on CEs as well.
> > >
> > > Steve
> > >
> > > > -----Original Message-----
> > > > From: LHC Computer Grid - Rollout
> > > > [mailto:[log in to unmask]] On Behalf Of Antun Balaz
> > > > Sent: 28 August 2007 21:51
> > > > To: [log in to unmask]
> > > > Subject: Re: [LCG-ROLLOUT] Starting rgma-gin
> > > >
> > > > Hi,
> > > >
> > > > As far as I can see, rgma-gin is configured to be started at
> > > > boot time on both
> > > > our LCG-CE and MON node, but it is not working on either of
> > > > them; log files
> > > > show the same symptom:
> > > >
> > > > 2007-08-28 22:47:07,887 [main] FATAL org.glite.rgma.gin.Gin -
> > > > Error during
> > > > startup: org.glite.rgma.gin.GinException: Error in
> > configuration file
> > > > '/opt/glite/etc/rgma-gin/gin.conf' - Unable to get table
> > > > definition for
> > > > 'GlueCEContactString'
> > > > 2007-08-28 22:47:09: rgma-gin Failed to Start
> > > >
> > > >
> > > > So, I would like to repeat Henry's question: should rgma-gin
> > > > be disabled? And
> > > > if yes, should this be done on ALL nodes?
> > > >
> > > > Thanks, Antun
> > > >
> > > > -----
> > > > Antun Balaz
> > > > Research Assistant
> > > > E-mail: [log in to unmask]
> > > > Web: http://scl.phy.bg.ac.yu/
> > > >
> > > > Phone: +381 11 3713152
> > > > Fax: +381 11 3162190
> > > >
> > > > Scientific Computing Laboratory
> > > > Institute of Physics, Belgrade, Serbia
> > > > -----
> > > >
> > > > ---------- Original Message -----------
> > > > From: Henry Nebrensky <[log in to unmask]>
> > > > To: [log in to unmask]
> > > > Sent: Tue, 28 Aug 2007 21:36:59 +0100
> > > > Subject: Re: [LCG-ROLLOUT] Starting rgma-gin
> > > >
> > > > > On Tue, 28 Aug 2007, Santanu Das wrote:
> > > > >
> > > > > > Hi all,
> > > > > >
> > > > > > This morning, I checked "/var/log/glite/rgma-gin.log" and
> > > > I found this
> > > > > > error in there:
> > > > > >
> > > > > > 2007-08-28 11:49:12: Starting rgma-gin
> > > > > > 2007-08-28 11:49:14,215 [main] FATAL
> > > > org.glite.rgma.gin.Gin - Error
> > > > > > during startup: org.glite.rgma.gin.GinException: Error in
> > > > configuration
> > > > > > file '/opt/glite/etc/rgma-gin/gin.conf' - Unable to get
> > > > table definition
> > > > > > for 'GlueCEContactString'
> > > > > > 2007-08-28 11:49:15: rgma-gin Failed to Start
> > > > >
> > > > > Which node is this on?
> > > > >
> > > > > My LCG-CE keeps failing to start rgma-gin hourly - is that
> > > > service even
> > > > > supposed to be running on a CE these days?
> > > > >
> > > > > My MON box only shows that error once recently - have you
> > > > _reconfigured_
> > > > > yours after the last update, as per the release notes?
> > > > >
> > > > > Thanks
> > > > >
> > > > > Henry
> > > > >
> > > > > --
> > > > > Dr. Henry Nebrensky [log in to unmask]
> > > > > http://people.brunel.ac.uk/~eesrjjn
> > > > > "The opossum is a very sophisticated animal.
> > > > > It doesn't even get up until 5 or 6 p.m."
> > > > ------- End of Original Message -------
> > > >
> > ------- End of Original Message -------
> >
------- End of Original Message -------
|