Hi again,
Profiles are now built. The continuing error was a side-effect of my
earlier efforts to correct the problem manually.
Cheers,
Matt.
On Tue, 10 Feb 2004, Steve Traylen wrote:
> Date: Tue, 10 Feb 2004 21:45:16 +0000
> From: Steve Traylen <[log in to unmask]>
> Reply-To: Testbed Support for GridPP member institutes
> <[log in to unmask]>
> To: [log in to unmask]
> Subject: Re: new release for APPLICATION testbed (v2_1_13)
>
> On Tue, 10 Feb 2004, Matt Robinson wrote:
>
> > Hi again,
> >
> > Sorry, must correct my last message. javasecurity broke after I commented
> > the offending line out of tomcat-cfg.h and succeeded in generating the
> > profiles. Also, it was the se and mon box which were affected but not the
> > ui.
>
> Hi Matt,
>
> I expect you need to update the server side components lcfg. There is
> a new javasecurity object with that attribute in it.
>
> checkServerRPMS.pl /opt/local/linux/7.3/rpmcfg
>
> should fix that up for you.
> >
> > Also, although my system seems to have reverted fully to 2.1.12 without
> > complaint, my ce has disappeared from edg-job-list-match. I can still
> > submit jobs via edg though.
>
> Yes it seems R-GMA is not as compatable in a mixed mode of these two versions
> and sites have been dropping in out of existance all day. It is hoped
> that once all sites have upgraded the problem will go away.
> >
> > Cheers,
> >
> > Matt.
> >
> > On Tue, 10 Feb 2004, Matt Robinson wrote:
> >
> > > Date: Tue, 10 Feb 2004 18:25:25 +0000 (GMT)
> > > From: Matt Robinson <[log in to unmask]>
> > > To: Testbed Support for GridPP member institutes
> > > <[log in to unmask]>
> > > Subject: Re: new release for APPLICATION testbed (v2_1_13)
> > >
> > >
> > > Hi Steve,
> > >
> > > I tried this first thing this morning thinking I could get it done before
> > > 2 pm. I found that after the update the profiles for the se and ui could
> > > not be generated. The lcfg apparently objected to the line:
> > > javasecurity.maxFileDesc 16384
> > > in tomcat-cfg.h.
> > >
> > > javasecurity broke on reboot and after failing to figure out a way around
> > > the problem, I went back to 2.1.12.
> > >
> > > Any ideas?
> > >
> > > Cheers,
> > >
> > > Matt.
> > >
> > > On Tue, 10
> > > Feb 2004, Steve Traylen wrote:
> > >
> > > > Date: Tue, 10 Feb 2004 15:07:25 +0000
> > > > From: Steve Traylen <[log in to unmask]>
> > > > Reply-To: Testbed Support for GridPP member institutes
> > > > <[log in to unmask]>
> > > > To: [log in to unmask]
> > > > Subject: new release for APPLICATION testbed (v2_1_13)
> > > >
> > > > Sorry if you have already seen this,
> > > >
> > > > So a new release for the EDG application testbed now exists.
> > > >
> > > > Because of review rehearsals and the actual review there is
> > > > really only a small window to actually do the the upgrade
> > > > starting tomorrow from after 09:00.
> > > >
> > > > It is hoped that in this case all sites can upgrade as soon as
> > > > is possible to allow a free time before the review.
> > > >
> > > > There is nothing particulary special about the upgrade.
> > > >
> > > > gpp-fetch-edg-release.sh -r v2_1_13 -o /tmp/
> > > >
> > > > cp the the files from /tmp/edg-release to
> > > > /var/obj/conf/server/source
> > > > and
> > > > /opt/local/linux/7.3/rpmcfg
> > > >
> > > > taking care not to write over your site-cfg.h.
> > > >
> > > > Download the new rpms, and reboot all nodes.
> > > >
> > > > Do also check the RUN TIME ENV values in the site-cfg.h
> > > >
> > > > It should be something like
> > > >
> > > > #define CE_IP_RUNTIMEENV SITE_EDG_VERSION MpiCh EDG-TEST ATLAS-6.0.4 LHCb-1.1.1 IDL-5.4 ALICE-4.01.00 ALIEN-1.29.9 CMKIN-1.1.0 CMKIN-VALID CMSIM-133 CMSIM-VALID POVRAY-3.1 DEMTOOLS-1.0 CSOUND-4.13
> > > >
> > > > with the addition of your local tag RAL-PRO, SHEF, BIRM or whatever plus
> > > > possibly GRIDPP-STAR.
> > > >
> > > > Note to Lawrence at Birmingham , you may as well add a GRIDPP-STAR at
> > > > this stage.
> > > >
> > > > Please get in touch with any problems.
> > > >
> > > > Steve
> > > >
> > > >
> > > >
> > > > --
> > > > Steve Traylen
> > > > [log in to unmask]
> > > > http://www.gridpp.ac.uk/
> > > >
> > > >
> > > > ---------- Forwarded message ----------
> > > > Date: Tue, 10 Feb 2004 12:29:16 +0100
> > > > From: Charles Loomis <[log in to unmask]>
> > > > To: EDG Site Admins. <[log in to unmask]>
> > > > Cc: ITeam <[log in to unmask]>
> > > > Subject: [SA-HELP] new release for APPLICATION testbed (v2_1_13)
> > > >
> > > > Hi,
> > > >
> > > > There is a new release for the application testbed--v2_1_13. Please
> > > > install this release on your site. HOWEVER, please do NOT do the
> > > > installation from 14:00 today (Feb. 10) to 10:00 tomorrow (Feb. 11).
> > > > There will be a rehearsal for the review demonstrations at this time.
> > > >
> > > > There are large number of changes from the last release. The full
> > > > change log is given below. Please be sure to reboot machines after this
> > > > upgrade.
> > > >
> > > > Please announce when you've upgraded your site. It would be good to
> > > > have all sites upgraded by this Friday at noon (sooner if possible).
> > > > This will allow some period for the testbed to stabilize before the
> > > > review next week.
> > > >
> > > > Thanks.
> > > >
> > > > Cal
> > > >
> > > >
> > > > * Tag t20040209_1700 (v2_1_13)
> > > >
> > > > Bug #none: Upgrade to workload v2.1.20. Upgrade VOMS, LCAS, LCMAPS,
> > > > and condor to latest versions.
> > > >
> > > > * Tag t20040209_1450
> > > >
> > > > Bug #none: Revert to previous Condor RPMs for workload downgrade.
> > > > Bug #none: Revert to previous LCAS/LCMAP for workload downgrade.
> > > > Bug #none: Revert to previous version of VOMS for workload downgrade.
> > > > Bug #none: Workload v2.1.19 rpms have problems. Revert to last known
> > > > working version, v2.1.12.
> > > >
> > > > * Tag t20040206_1700
> > > >
> > > > Bug #some: Upgrade workload rpms to v2.1.19. Fix bug in jobcontrol.
> > > > Bug #none: Update CHANGES to include bug info on RM changes.
> > > >
> > > > * Tag t20040206_0830
> > > >
> > > > Bug #some: Upgrade RM to v1.6.8.
> > > > Bug #none: " algorithm for directory creation for nonexisting paths
> > > > " through gridftp refined.
> > > > Bug #2534: " hanging problem if permission on root directory denied fixed
> > > > Bug #none: Upgrade RM client api to v2.2.8.
> > > > The normal RPM also had the non-rgma version in it.
> > > > codewise, 2.2.6, 2.2.7 and 2.2.8 are identical,
> > > > only the install target has changed so that wp1
> > > > is not depending on rgma.
> > > >
> > > > * Tag t20040205_1745
> > > >
> > > > Bug #none: Upgrade to v2.1.18 of workload rpms. Corrected problems in
> > > > configuration scripts.
> > > > Bug #none: Update accepted CA rpms. Notes:
> > > > - Remove:
> > > > - old CERN CA "CERN-old"
> > > > - old GermanGrid CA "GermanGrid"
> > > > - expired DOE Science Grid CA "DOESG" (hash 9d8753eb)
> > > > - expired GridPP (hash 0ed6468a)
> > > > - Rename: "GermanGrid new" to "GermanGrid"
> > > > - Add: "/C=CN/O=IHEP/OU=CC/*" to the list of namespaces
> > > > that may be signed by ASGCCA.
> > > > - Add: Armenian CA
> > > > - Reduced the keys size (no 2048 bits) of the FNAL Top-level CA
> > > > Bug #2531: Upgrade to v1.0.5 of lcfg-fstab.
> > > > Bug #none: Revert to previous RM c++ client as v2.2.7 breaks interaction
> > > > with workload mgt. on RB.
> > > > Bug #some: Upgrade RM and RM c++ api.
> > > > Bug #none: " the make install target deploys now the 'norgma' c++ api
> > > > version
> > > > of the library. this in order to get rid of the rgma library
> > > > dependency in the wp1 rpms.
> > > > Bug #none: " castor GridFTP's error message handling was incorrect
> > > > for mkdirs.
> > > > Bug #2441: " java.lang.NumberFormatException
> > > > Bug #2479: " <edg-rm cr http>can't identify size of source and destination
> > > > Bug #none: Upgrade VOMS admin rpms (v0.7.0) to match VOMS version.
> > > >
> > > > * Tag t20040204_0830
> > > >
> > > > Bug #some: Upgrade to workload v2.1.17. Includes following changes:
> > > > - Added edg-wl-parse-configuration.sh
> > > > - PYTHON command line: Warning on LB displayed only in
> > > > debug mode
> > > > - GUI: multiple job output retrieval; list match rank
> > > > displayed properly; Expired credential proxy re-loaded;
> > > > OutofBound Exception checks added; Job Submitter
> > > > preferences (old context loading when Cancel option is
> > > > selected from Preferences pane)
> > > > Bug #none: Upgrade wlconfig component to v1.0.19.
> > > > Bug #none: Update SPMA and rpmt versions (test only).
> > > > Bug #none: Upgrade condor rpms to those needed by workload v2.1.16-2.
> > > > Bug #2515: Upgrade to RGMA v3.4.14.
> > > > Bug #none: Upgrade to wlconfig component v1.0.18.
> > > > Bug #some: Upgrade to workload v2.1.16-2.
> > > > Bug #none: More RH7.3 security updates. (Fedora legacy project.)
> > > > Bug #none: Remove expired DOESG (ca_DOESG-0.19-1) CA rpm.
> > > > Bug #none: Security patch for CVS.
> > > > Bug #none: Upgrade to voms 1.2.0.14 which provides threaded libraries for
> > > > workload mgt.
> > > > Bug #none: Remove hpijs-1.0.2-8 from RH rpm list. All of its files are
> > > > already provided by the ghostscript rpm.
> > > > Bug #none: Fix paths in globus rpm again.
> > > > Bug #2289: New java security lcfg object, sets ulimit for tomcat user.
> > > > Bug #2477: Fix paths and permissions on globus libraries.
> > > > Bug #none: Add SPMA (quattor replacement for updaterpms) to release.
> > > > This is for testing only. Switches are off by default.
> > > > Bug #none: Remove expired GridPP (UK HEP PP) CA rpm.
> > > >
> > > > * Tag t20040125_1600
> > > >
> > > > Bug #none: Add wxWindows to UI for WP10 GATE demo.
> > > >
> > > > * Tag t20040124_1240
> > > >
> > > > Bug #none: Remove LCAS job repository plugins.
> > > > Bug #none: Add missing dependencies on RB machine for new WP1 rpms.
> > > > Bug #some: Upgrade to RGMA v3.4.13.
> > > > Bug #none: " Prevent edg-rgma-config accessing WEPAPPS directory if it
> > > > does not exist - e.g. no tomcat
> > > > Bug #none: " Put link to edg-rgma-env.[c]sh into
> > > > $EDG_LOCATION_VAR/etc/profile.d
> > > > Bug #none: " Restore xml parsing for servlet memory check
> > > > Bug #none: " Some symbolic links not created by edg-rgma-config
> > > > Bug #none: " edg-rgma-config creates $EDG_LOCATION_VAR/log directory if
> > > > necessary
> > > > Bug #2355: " getNewStatus prints memory usage in MB
> > > > Bug #none: " Latest Producers not being removed cleanly
> > > > Bug #2292: " Default constructor added to database producer
> > > > Bug #2425: " and #2426 Fixed problems if MeasurmentDate/Time explicity
> > > > declared so it is now impossible to have two of them
> > > > Bug #2149: " All producers now stream
> > > > Bug #2169: " API properties merged into one file called rgma.props
> > > > Bug #2223: " BrowserServlet streams result sets.
> > > > Bug #2348: " Fixed Latest producer replaces tuple even if replacement has
> > > > older date/time
> > > > Bug #2421: " Faulty db connections are re-created for database and latest
> > > > producers
> > > > Bug #2430: " Old tuples in StreamProducer get cleaned up properly.
> > > > Bug #2431: " GRRPThread removes expired instances from tracker.
> > > > Bug #2450: " ServletConnection_getErrors added to C, Perl, Python
> > > > Bug #2460: " Deadlock problem between TimeoutThread and
> > > > ConsumerInstance.close
> > > > fixed.
> > > > Bug #none: " Added stopStreaming message sent to all producers.
> > > > Bug #none: " All gout error messages go to edg-rgma-tools.log, and are
> > > > timestamped
> > > > Bug #none: " Change over to new Python configuration script edg-rgma-config
> > > > Bug #none: " Fix null pointer exceptions in PropertyGetter ctr used by Gout
> > > > Bug #none: " Improved sanity checking in service status publisher
> > > > Bug #none: " Shared C and C++ API libraries are now provided
> > > > Bug #none: Upgrade LCAS and LCMAPS to v0.0.20. Link against latest VOMS.
> > > > Add additional plugins.
> > > > Bug #none: Add updated ALICE rpms (tag ALICE-4.01.00).
> > > > Bug #none: Upgrade to v1.2.0.9 of VOMS.
> > > > Bug #none: Upgrade condorconfig component to v1.0.10.
> > > > Bug #some: Upgrade RGMA to version 3.4.11.
> > > > Bug #none: " Latest Producers not being removed cleanly
> > > > Bug #2292: " Default constructor added to database producer
> > > > Bug #2425: " Fixed problems if MeasurmentDate/Time explicity
> > > > declared so it is now impossible to have two of them
> > > > Bug #2426: " ""
> > > > Bug #2149: " All producers now stream
> > > > Bug #2169: " API properties merged into one file called rgma.props
> > > > Bug #2223: " BrowserServlet streams result sets.
> > > > Bug #2348: " Fixed Latest producer replaces tuple even if replacement has
> > > > older date/time
> > > > Bug #2421: " Faulty db connections are re-created for database and latest
> > > > producers
> > > > Bug #2430: " Old tuples in StreamProducer get cleaned up properly.
> > > > Bug #2431: " GRRPThread removes expired instances from tracker.
> > > > Bug #2450: " ServletConnection_getErrors added to C, Perl, Python
> > > > Bug #2460: " Deadlock problem between TimeoutThread and
> > > > ConsumerInstance.close fixed.
> > > > Bug #none: " Added stopStreaming message sent to all producers.
> > > > Bug #none: " All gout error messages go to edg-rgma-tools.log, and are
> > > > timestamped
> > > > Bug #none: " Change over to new Python configuration script edg-rgma-config
> > > > Bug #none: " Fix null pointer exceptions in PropertyGetter ctr used by Gout
> > > > Bug #none: " Improved sanity checking in service status publisher
> > > > Bug #none: " Shared C and C++ API libraries are now provided
> > > > Bug #some: Upgrade workload mgt. to version 2.1.15.
> > > > Bug #1103: "
> > > > Bug #2104: "
> > > > Bug #2400: "
> > > > Bug #2440: "
> > > > Bug #2455: "
> > > > Bug #2456: "
> > > > Bug #2461: "
> > > > Bug #2485: "
> > > > Bug #none: " other changes:
> > > > - supporting the new PFN format (SEid can be followed by port number)
> > > > according to LCG requests
> > > > - removed VOMS_Export function in the proxyrenewal
> > > > - Changed the location from sbin to bin for the following files:
> > > > edg-wl-ui-jobsubmitter.sh
> > > > edg-wl-ui-jdleditor.sh
> > > > edg-wl-ui-jobmonitor.sh
> > > > edg-wl-ui-jobsubmitter.csh
> > > > edg-wl-ui-jdleditor.csh
> > > > edg-wl-ui-jobmonitor.csh
> > > > - Added edg-wl-parse-configuration.sh in the start up scripts to
> > > > create some
> > > > directories used by some services
> > > >
> > > > * Tag t20040120_1420
> > > >
> > > > Bug #none: Add GATE rpms to default rpms lists for CE and WN.
> > > >
> > > > * Tag t20040120_1040
> > > >
> > > > Bug #some: Upgrade to RGMA v3.4.7 to fix listed bugs.
> > > > Bug #2149: " All insertable now stream
> > > > Bug #2169: " API properties merged into one file
> > > > Bug #2223: " BrowserServlet streams result sets.
> > > > Bug #2292: " Dynamic database creation added to database producer (java API
> > > > only)
> > > > Bug #2333: " edg-rgma -c "latestproducer decl Service" broken
> > > > Bug #2348: " Latest producer replaces tuple even if replacement has older
> > > > date/time
> > > > Bug #2356: " DeclarableInstance close() method simplified
> > > > Bug #2421: " Faulty db connections are re-created for database and latest
> > > > producers
> > > > Bug #2430: " Old tuples in StreamProducer get cleaned up properly.
> > > > Bug #2431: " GRRPThread removes expired instances from tracker.
> > > > Bug #2450: " ServletConnection_getErrors missing from C, Perl, Python
> > > > Bug #2460: " Deadlock problem between TimeoutThread and
> > > > ConsumerInstance.close fixed.
> > > > Bug #none: " Added stopStreaming message sent to all producers.
> > > > Bug #none: " All gout error messages go to edg-rgma-tools.log, and are
> > > > timestamped
> > > > Bug #none: " Change over to new Python configuration script edg-rgma-config
> > > > Bug #none: " Fix assorted browser servlet problems
> > > > Bug #none: " Fix edg-rgma-config to always remove links before recreating
> > > > them
> > > > Bug #none: " Fix latest producer updating wrong records - operator
> > > > precedence problem
> > > > Bug #none: " Fix null pointer exceptions in PropertyGetter ctr used by Gout
> > > > Bug #none: " Improved sanity checking in service status publisher
> > > > Bug #none: " Provide shared C and C++ API libraries
> > > >
> > > > * Tag t20040114_1500
> > > >
> > > > Bug #none: Complete list of rpms for GATE (WP10).
> > > > Bug #none: Change WP10 software root to /opt/biomed.
> > > > Bug #none: Remove duplicate GATE (WP10) rpms.
> > > > Bug #2477: Fix .la files with incorrect paths in two VDT rpms.
> > > > Bug #none: Add updated GATE (WP10) rpms for tests.
> > > > Bug #2456: New cliconfig lcfg component.
> > > > Bug #none: Add ares-devel, boost-g3- and classads-g3 to UI for its API.
> > > >
> > > > * Tag t20040106_1000
> > > >
> > > > Bug #none: Redhat kernel update to 2.4.20-28.7
> > > > Bug #none: Alice rpms and run time environment ALICE-3.09.06.
> > > > Bug #none: New voms-httpd (1.0.5-1_RH7.3) and mod_ssl (2.8.12-3_RH7.3)
> > > > Bug #none: Upgrade mkgridmap to 2.1.2_RH7.3
> > > > Bug #none: Update release notes to change tomcat memory parameter to
> > > > javasecurity.serverMemMax.
> > > > Bug #none: Security update for apache (httpd) server.
> > > > Bug #none: Update release notes and mkgridmap configuration to use
> > > > correct wpsix VO names.
> > > > Bug #none: Add edg-tomcat4 FM check to MON and IC; remove std. tomcat check
> > > > on MON.
> > > > Bug #2325: Upgrade to RM c++ client v2.2.6 to fix WP1/WP2/WP3 interaction.
> > > > Bug #none: Upgrade to pcpd v2.0.7.
> > > >
> > > > * Tag t20031218_1040
> > > >
> > > > Bug #none: Upgrade to edg_se_handler_rfio_read_gcc3_2_2-2.1.18-1 on SE.
> > > > Bug #none: Prepare for adding biomedical GATE application.
> > > > Bug #none: Upgrade to workload 2.1.13. Use "copyAndRegisterFile" rather
> > > > than "creg". Port to COG v1.1-1.
> > > > Bug #2322: Upgrade to RM v1.6.4 to fix listed bugs.
> > > > Bug #2407: "
> > > > Bug #2427: "
> > > > Bug #none: Upgrade to cog-jar v1.1-1 everywhere.
> > > > Bug #none: Add SITE_EDG_VERSION to list of run time environment variables
> > > > to allow users to select sites based on the EDG version from
> > > > the job JDL.
> > > > Bug #2420: Upgrade fabric monitoring (v2.5.7) for gcc3.2.2 and listed bugs.
> > > > Bug #2418: "
> > > > Bug #2389: "
> > > > Bug #2151: Upgrade edg-gridftp-client to v1.2.5 to fix listed bugs.
> > > > Bug #1467: "
> > > > Bug # 739: "
> > > > Bug #none: Upgrade edg-pcpd to v2.0.5.
> > > >
> > > >
> > > > * Tag t20040130_1130 (v2_1_12)
> > > >
> > > > Bug #none: Update kernel version in redhat73-cfg.h file.
> > > >
> > > > * Tag t20040130_1045 (v2_1_11)
> > > >
> > > > Bug #none: Fix biome software location in this branch! Should be
> > > > /opt/biomed with a 'd'.
> > > >
> > > > * Tag t20040130_1010 (v2_1_10)
> > > >
> > > > Bug #none: Remove expired DOESG (ca_DOESG-0.19-1) CA rpm.
> > > > Bug #none: Remove expired GridPP (UK HEP PP) CA rpm.
> > > > Bug #none: Remove hpijs-1.0.2-8 from RH rpm list. All of its files are
> > > > already provided by the ghostscript rpm.
> > > > Bug #none: Security update for apache (httpd) server.
> > > > Bug #none: Redhat kernel update to 2.4.20-28.7
> > > > Bug #none: Security patch for CVS.
> > > > Bug #none: Fix permissions and paths on Globus libraries.
> > > >
> > > > * Tag t20040123_0815 (v2_1_9)
> > > >
> > > > Bug #none: Add GATE and Alice rpms for the demo.
> > > >
> > >
> > >
> >
> > --
> >
> > ================================================
> > Matthew Robinson
> > HEP System Manager & Dark Matter Group
> > Department of Physics and Astronomy
> > University of Sheffield
> > Hicks Building
> > Hounsfield Road
> > Sheffield
> > S3 7RH
> > [log in to unmask]
> > Office: 0114 222 3553
> > Mobile: 07968 873 775
> > Fax: 0114 272 8079
> > ================================================
> >
> > quidquid latine dictum sit, profundum viditur.
> >
>
> --
> Steve Traylen
> [log in to unmask]
> http://www.gridpp.ac.uk/
>
--
================================================
Matthew Robinson
HEP System Manager & Dark Matter Group
Department of Physics and Astronomy
University of Sheffield
Hicks Building
Hounsfield Road
Sheffield
S3 7RH
[log in to unmask]
Office: 0114 222 3553
Mobile: 07968 873 775
Fax: 0114 272 8079
================================================
quidquid latine dictum sit, profundum viditur.
|